Had the same problem when i bought a used 2004 grand marquis from the ford dealer. the code is associated with the vin and had to be looked up by the dealer. as far as i know the code is not located anywhere on the car. after getting mine i wrote it inside the door frame on the driver's door.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1.locate and enter the factory set code(taped to the computer module also located on trunk lid. 2.press the 1/2button within 5 seconds of step 1. 3. enter your personal 5 digitcode within 5 seconds. Allthedoors will lock and unlock to confirm programming of the new code.
the code is usually found on stickers on the trunk hinges. if not remove the drivers door panel, the code is on the module that is in the door. use that code to access all functions including setting your own code.
look for the permanent code on the plastic card in the owner manual packet. Or, pay dealer to extract code from computer.
Keyless Entry Keypad Code Programming
NOTE: The system only allows one code to be programmed.
Enter the permanent factory keyless entry keypad code.
Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds after activation will erase the stored customer code . The door locks will lock, then unlock, confirming the code is erased. The existing code will not need to be erased to program new a code.
Within five seconds, enter the new five-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is programmed.