Hi, the diagram below shows the routing and also the adjusting mechanism for tightening each belt. Please let me know if you have any questions, and thanks for using FixYa.
Yes, this is the GA16DE 1.6 liter Nissan engine. Dual overhead cams, right?
There are some additional diagrams at this website, but I don't see any with an idler on the alternator circuit: http://www.2carpros.com/diagrams/nissan/...
Hmmm...this diagram has an idler for the alternator but only shows 2 belts. If this is not the one, you may have to buy a Haynes or Chilton manual for the car, because these are the only diagrams available in the open literature. Sorry I couldn't help.
That just isn't right. Haynes should do better. If the next guy can't find it either, you may try checking the library. Hope you find it.
×
Hi,
This will get you sorted.
Let me know if you need more information
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt, serpentine
belt, accessory belt, fan belt, engine belt routing diagrams for all types of
car models?
Click the link below: ----
http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.
1,492 views
Usually answered in minutes!
is this a 1.6L engine? my tension adjustment for alternator belt is not on alternator it is a separate adjustable idler pulley
is this a 1.6L engine? my tension adjustment for alternator belt is not on alternator it is a separate adjustable idler pulley
yes it is a 1996 dual cam but your diagram does not show idler/tension adjustment pully for alternator. mine tension adjustment is NOT on alternator. i have changed alternator before. i had someone change it this time and the idler your digram does not show came off. i was on interstate in traffic at 75 miles per hour when it came off and the belt apparently tangled up in the other belts and took them off by time i could pull over everthing was gone. i need diagram of routing for all three belts yours is wrong for my car. i have an 8mm bolt that extends from pulley to just under/but not connected to the alternator that adjusts the tension.
i looked none are correct i bought car new in 1996 no alterations have been made. may have go to nissan for this. your diagram looks close just missing idler in diagram
Need diagram for the three
Problem with the Nissan Sentra Cars & Trucks
need diagram for the three serpentine belts on a 1996 sentra gxe 1.6 liter. seems no one can find diagram that works. here is answer i posted about diagram jturcotte sent me. yes it is a 1996 dual cam but your diagram does not show idler/tension adjustment pully for alternator. mine tension adjustment is NOT on alternator as your diagram shows. i have changed alternator before. i had someone change it this time and the idler your digram does not show came off. i was on interstate in traffic at 75 miles per hour when it came off and the belt apparently tangled up in the other belts and took them off by time i could pull over everthing was gone. i need diagram of routing for all three belts yours is wrong for my car. i have an 8mm bolt that extends from pulley to just under/but not connected to the alternator that adjusts the tension. i bought car new no modifications have been made to it
i appreciate your efforts. i have a haynes for the car no digrams in it
×