1988 crown vic V-8 MPG? - 1988 Ford Crown Victoria

Elementary watson.



https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.lokar.com/downloads/pdf-instructions/INS0002-ThrottleCable.pdf&ved=0ahUKEwinsc7-norOAhUBDmMKHX0KBYEQFghOMAo&usg=AFQjCNHB26JsWZhTcSNq6sQ1xoQdeOpIzA

Check fuss first under carpet in trunk there is module

Is the check engine light on ?
Could be a long list of things including sensors, air filter, exhaust restriction, even the brakes.

If the cap rotor and plug wires are original, I would look at them first.
Also check the condition of the plugs.

sounds like your PCM might be bad if it is not supplying correct voltage to fuel injector.

Also, the fuel injector itself may be bad or bad ground.

Does it have throttle body injection on that crown vic?

For home shade tree mechanics 8 hours on average. 2 hours for a pro with the tools required for draining the tank

attached to the throttle body,looks like an electric motor bolted to a square piece with the corners notched out,with 2 wire connector on the end.

Inside the fuel tank

i am trying to install an aftermarket temperature guage with capillary tube into my 1988 crown victoria ltd 5.0 efi. where does the capillary tube mount?

I have a 1988 Ford Crown Vic....on mine, there is a small leak at the back end of the transmission, where the drive shaft connects....

Is this where your fluid is leaking from?

My cousin is a ford mechanic...he told me that he sees that a lot on the vics of this age.....not because a seal is bad, but because of how the tranny is made....

but im not sure...

hope this helps somehow...