Question about Chevrolet 1500

1 Answer

My 1994 truck shift fine from 1 to second but then it doesn't shift to any other gear.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 206 Answers

Could be as simple as a vacuum line leading to the transmission vacuum modulator is off or the modulator itself is bad, check to see if you have the hoses all connected first, because if there is no vacuum the transmission thinks you are under a heavy load and your foot is to the floor, this means the engine is creating little or no vacuum. So the tranny will stay in a low gear

Posted on Jul 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gear is stiff and experiencing a difficulty when engaging second gear. other gears seems to be fine but the shifting is not smooth.


I suspect that it will be in the shift mechanism
If it is a cable shift then replace the cable
If it levers or other linkages check and adjust or lubricate as required
I doubt it is in the clutch as you haven't mentioned difficulty in selecting first gear only shifting from 1 to 2nd.

Jun 21, 2015 | Opel Corsa Cars & Trucks

2 Answers

1994 lesabre not shifting


Not a solution but a suggestion.. If you have a scanner hook it up and check for codes that way... it could be throtle positioning sensor

May 15, 2014 | 1994 Buick LeSabre

1 Answer

I have a 1994 ford tempo that has issues shifting. It starts fine goes into all gears . it shifts from first to second gear at 35mph then shifts again at 45mph. What could be the issue? I changed the...


You may need a transmission shop for this.
Some older cars used a vac modulator to control shift time, but I don't see one listed for a 94 Tempo. Whatever Ford uses to control shift time may be faulty, or the kickdown cable to the throttle body may be sticking. It could have a solenoid inside that does what the modulator once did.

Dec 12, 2012 | 1994 Ford Tempo

2 Answers

I hav ea 94 lincoln. It works in reverse. I start out in drive. It is fine from 1st to second gear. It will not go into third or overdrive.


This is a computer shifted transmission, if there is a problem with the electrical shift solenoids the system will set a code. Aamco does this code testing from free, I suggest you have them hook it up and see what shows up in the computers memory.

Jun 18, 2012 | 1994 Lincoln Town Car

1 Answer

I have a 1994 gmc yukon and im having trans issues just changed the trans pan and seal thinking dirty fluid. Well it manual shift 1-2 than over drive than it seems its over idling and like im in...


you are right to think it is a sensor. trash can get into the shift solenoids and make a trans act funny. you could drop the pan and replace the solenoids located in the back of the valve body.

Jul 16, 2011 | GMC Yukon Cars & Trucks

1 Answer

I have a 1994 Lincoln Contenental. Car drives just fine in first gear but will not shift into second gear.


If it is an automatic check and make sure that you have enough automatic transmission fluid in the car to little fluid will not allow the transmission to shift.

Apr 16, 2011 | 1994 Lincoln Continental

1 Answer

Car will not shift out of second gear. while driving it shifts fine to second gear from first gear but it stays in second gear the entire time driven


it is going in limp mode,
if your speedometer is not working will cause this,that would be a speed sensor,or the other two reasons would be the input or output sensors on the tranny

Nov 29, 2009 | 1994 Chrysler Concorde

2 Answers

1994 Ford Probe GT standard transmission - Will not shift into first or second while car is running. Shifts fine while car is off.


Check your slave cylinder Usually located below the brake master cylinder. If there' Fluid you probably need a clutch.

Sep 09, 2009 | 1994 Ford Probe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...