SOURCE: need to know the firing order of plug wires off the engine 3.0
Here ya go!
1998 Dodge Caravan FWD
3.0 liter V-6 VIN "3"
SOURCE: Need firing order and, I need to know what side
To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.
If
a coil is replaced on any of the 3.1L, 3.4L or 3.8L engines, it may not
be numbered, as is the factory coil. For this reason it is imperative
that you label all wires before disconnecting any of them. Also, before
removal, compare the current wiring with the accompanying
illustrations. If the current wiring does not match, make notes in your
guide to reflect how your engine is wired.
Fig. 3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
Fig. 3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
Fig. 3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
Fig. 3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
Fig. 3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System
Fig. 3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System
The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X
and 3.5L VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on
the cowl side (rear) of the engine compartment and are numbered 1,3,5,
left bank cylinders on the front side of the vehicle, are numbered
2,4,6.
The firing order for the 3.8L VIN K and 3.8L VIN 1 engines
is 1-6-5-4-3-2. Starting at the front of the engine, cylinders in the
left bank are numbered 1,3,5 and cylinders in the right bank are
numbered 2,4,6
Hope helped (remember rated this help) Good luck.
Testimonial: "I really appreciate your help. This really helped me alot."
SOURCE: need diagram for firing order. number 2 not firing...
For the 1995 Mercedes-Benz C-Class: C220, C280, C36
I do not know if you have the 2.2L; 2.8L or 3.6L Engine; however I have included all below.
For the 2.2L DOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
(back)
|...4...|
|...3...|
|...2...|
|...1...|
(front)
For the 2.8L AND 3.6L DOHC In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
|...6...|
|...5...|
|...4...|
|...3...|
|...2...|
|...1...|
(front)
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
SOURCE: Need 1997 Explorer 4.0l Efi V 6.0 Firing Order
Cylinders are as follows.
Drivers side front to rear
4,5,6
Passenger side front to rear
1,2,3
Coil is marked the same, according to the manual.
Firing order is 1,4,2,3,5,6
533 views
Usually answered in minutes!
×