Question about Ford Aerostar

1 Answer

Iam tring to take off fan clutch off of ford aerostar 1990 3.0L do you turn f. or r. to take it off

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 143 Answers

I feel sure you've finished the job by now, but it screws off backwards...left handed threads.

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get the fan clutch off so i can fix the water pump


the manual calls out special tools. See if you can use the belt or a belt pipe wrench to hold the pump. The threads on the clutch nut are LEFT HANDED.

Oct 11, 2010 | 1990 Ford Aerostar

1 Answer

How do you remove the fan to remove the water pump of the 1994 Ford Aerostar 3.0?


the viscus fan is removed buy turning the nut clockwise the way yo would normaly tighting most things as its a left hand thred . you do this by using a viscus fan spanner or a chisel and hammer with a strong sharp hit.

Sep 03, 2010 | 1994 Ford Aerostar Extended

1 Answer

Having trouble finding the fan clutch on a 1990 ford aerostar


the fan clutch is located between the pulley and the fan itself normally grey in color

Feb 08, 2010 | 1990 Ford Aerostar

1 Answer

How do you change a waterpump on a 1987 ford aerostar with a clutch fan


Pretty easy for average mech. first drain coolant by loosening the lower radiator hose.
Make sure to have a drain pan. remove the power steering belt by removing the bolts to the idler pulley. and let belt off the pulley.remove the alternator upper bracket. and remove belt.
Take fan shroud off with two 8mm bolts on top oe it.
You cant remove untill you remove the clutch fan assembly.
It is left handed thread.
It has to be removed together.
Remove the four bolts to the pulley on front of water pump. and then remove all 14mm bolts around the pump.
Then remove 8mm bolts and it will be able to come off. assemble in reverse order!

Jan 01, 2010 | 1987 Ford Aerostar

1 Answer

1994 Ford Aerostar won't shift into gear


sounds like the clutch has had it mate.
get it repaired or just get a whole new clutch from ebay

Jun 19, 2009 | 1994 Ford Aerostar Extended

1 Answer

1997 ford aerostar. no air blowing through


I had same problem on my 96. There was a corroded line (tiny white hose)

Jun 18, 2009 | 1997 Ford Aerostar Extended

1 Answer

Water pump


No you must take the fan clutch and fan off, that's not easy sometimes, usually the fan and clutch are pulled off using a pulling tool before you remove the pump, take it to a machine shop or Auto zone may help pull it. good luck

Jun 21, 2008 | 1994 Ford Aerostar Extended

1 Answer

Stalls when put into gear


Its possible it could be other things causing the problem, but seeing as you've checked most of the likely causes, it is most likely your Torque-Converter. The lockup clutch in your Stator-Fan located inside the Torque-Converter could be siezed, causing the car to stall.

May 16, 2008 | 1993 Ford Aerostar Extended

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...