Question about 2005 Pontiac Grand Am

1 Answer

How to replace an ignition switch - 2005 Pontiac Grand Am

Posted by on

  • bboyskooter Aug 13, 2008

    my 94 firebird drives fine and then dies when im driving. ive read tons of stuff and no one knows whats wrong. i had 3 shops look over my car and the last guy told me i could be my ignition switch but every thing i read says every one changes there ignition switch but it never stops it from dieing. i dont want to pay some one to fix something thats not broken if i could do it and if it doesnt work then i can replace something els but i would rather save that money and use it to fix whats really wrong!!

×

1 Answer

Have you tested your alternator? if that isnt keeping a charge running through your vehicle, then that would kill it. easiest way to check, is start your car, then unplug your battery, if your car dies, then your alternator is bad.

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 1995 Aurora after replacing a bad ign. Switch the the new switch needs to be reprogram. Is that something I can do my self?


How to Reprogram the Ignition Key for an Oldsmobile Aurora

www.ehow.com > Cars
How to Reprogram the Ignition Key for an Oldsmobile Aurora. The Aurora is ...Replace the ignition switch in a 2002 Oldsmobile Alero after a thorough trouble-shooting session to eliminate issues with voltage, shorts, faulty grounds... How to ...

How to replace an ignition switch in a Oldsmobile Alero ...

? 14:05
https://www.youtube.com/watch?v=5FKwU467PKU
Mar 10, 2012 - Uploaded by BuckeyeBryan
How to replace an ignition switch in a Oldsmobile Alero. ... Showmore ... How to diagnose a bad starter, ignition, neutral safety switch!

GM How to Replace Ignition Lock Cylinder - YouTube




Dec 15, 2015 | Cars & Trucks

1 Answer

Kexus ignition switch replace


To troubleshoot these issue, for ignition switch replacing procedure:---
Click the link below:---


IGNITION SWITCH REPLACING

It depends on vehicle to vehicle. But it's not very difficult on mot of cars to replace ignition switch. Basic theory of replacing ignition switch is same for all car models. -----

To replace ignition switch on your vehicle, I suggest you few helplinks with proper ignition switch replacing procedure. View its details and you can replace ignition switch on your vehicle.

-------------

Click the link below: ------

----------

How to remove ignition switch on VW Car models?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html

-------------

How to replace Ignition Lock Cylinder on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-lock-cylinder.html

--------------


Ford Taurus: Ignition Switch & Steering Column Replacing?

http://repairhelpcenter.blogspot.in/2012/06/ford-taurus-ignition-switch-steering.html

-----------

How to replace Ignition Switch on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-switch-on-acura.html

--------------

How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

------------

1995 Ford Taurus: Ignition switch not turning OFF?

http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html

-----------

Ignition Switch Will Not Turn Off?

http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html

---------

These will help.

Thanks.

Dec 06, 2012 | 1993 Lexus Es 300

3 Answers

How to replace ignition switch


It depends on vehicle to vehicle.But its not very diffult on mot of cars to replace ignition switch.Basic theory of replacing ignition switch is same for all car models.:-----
To replace ignition switch on your vehicle,i suggest you few helplinks with proper ignition switch replacing procedure. View its details and you can replace ignition switch on your vehicle.-------------Click the link below :----------------

How to remove ignition switch on VW Car models?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html

-------------

How to replace Ignition Lock Cylinder on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-lock-cylinder.html

--------------


Ford Taurus: Ignition Switch & Steering Column Replacing?

http://repairhelpcenter.blogspot.in/2012/06/ford-taurus-ignition-switch-steering.html

-----------

How to replace Ignition Switch on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-switch-on-acura.html

--------------


How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

------------
1995 Ford Taurus: Ignition switch not turning OFF? http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html
-----------
Ignition Switch Will Not Turn Off? http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html
---------
These will help.
Thanks.


Nov 25, 2012 | Cars & Trucks

3 Answers

How do I replace my ignition switch on my 1985 audi coupe gt?


Hi!!

The ignition switch is usually mounted to the steering column and is operated by a linkage rod.

NOTE
On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible.
On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash


5e9852e.gif
The ignition switch is operated by the key switch.

To replace the switch:
  • Remove the ignition switch wiring harness.
  • Unbolt it from its position.
  • Bolt the new switch into position.
  • Attach the witing harness.
Don't forget to rate this post!! Good Luck!!

Jul 24, 2010 | 1985 Audi GT

1 Answer

2003 DOGE NEON IGNITION .LIGHTS, POWER COMES ON BUT CAR WILL NOT START AFTER I PLAY WITH IGNITION SEVERVAL TURING AND PUSHING IT IN SEVERAL TIMES IT THEN STARTS


replace the ignition switch
The ignition switch is usually mounted to the steering column and is operated by a linkage rod.
NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.
f32-17gif.gif The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:
  • Remove the ignition switch wiring harness.
  • Unbolt it from its position.
  • Bolt the new switch into position.
  • Attach the witing harness.

May 22, 2010 | 2003 Dodge Neon

2 Answers

Remove/replace starter sloenoid


your Ignition Switch is bad here is how to replace it
The ignition switch is usually mounted to the steering column and is operated by a linkage rod.
NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.
f32-17gif.gif The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:
  • Remove the ignition switch wiring harness.
  • Unbolt it from its position.
  • Bolt the new switch into position.
  • Attach the witing harness.

May 22, 2010 | Jaguar Vanden Plas Cars & Trucks

1 Answer

Ignition switch replacment


The ignition switch is usually mounted to the steering column and is operated by a linkage rod.

NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.

bbd532a.gif

The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:
  • Remove the ignition switch wiring harness.
  • Unbolt it from its position.
  • Bolt the new switch into position.
  • Attach the witing harness.

Its possible that this video can helped (for Explorer)...


Good luck.

Mar 18, 2010 | 1999 Ford Expedition

2 Answers

Ignition Switch


Hello 85chevy,
Thankyou for choosing FixYa.com my name is David this should help you with your problem
Home > Product and How-To Information > Product and How-To Information: I > Product

Ignition Switch grey_line.gif Inspect | Test | Replace The ignition switch is usually mounted to the steering column and is operated by a linkage rod.
NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible.
On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.

0900823d800500ef.gif

The ignition switch is operated by the key switch. Courtesy of Ford Motor Company.
To replace the switch:
  • Remove the ignition switch wiring harness.
  • Unbolt it from its position.
  • Bolt the new switch into position.
  • Attach the witing harness.

upper_left.gif grey_line.gif upper_right.gif grey_line.gif Look for More Parts A B C D E F G H I
J K L M N O P Q R
S T U V W X Y Z grey_line.gif lower_left.gif grey_line.gif lower_right.gif Related Parts: grey_line.gif 0900823d8004b202.gif Lock - Ignition (Cylinder and Keys) Return to top.

Nov 06, 2008 | 1985 Chevrolet El Camino

1 Answer

Ignition switch


  1. Remove the turn signal and windshield wiper switch.
  2. Disconnect the ignition switch electrical connector.
  3. Remove the two ignition key reminder switch screws.
  4. Remove the ignition switch screws and remove the ignition switch.
Installation

To install, reverse the removal procedure. Check for proper operation of the ignition switch.

Nov 04, 2008 | 1992 Mercury Tracer

1 Answer

Seems battery being drained


Q1. Engine will not start or is hard to start (Cranks OK) A1 -Ignition lock switch faulty -Ignition coil faulty -Power transistor faulty -Spark plugs faulty -Ignition wiring disconnected or broken -Spark plugs faulty Q2, Engine will not crank A2. Battery discharged Battery cables loose, corroded or worn out Transaxle range switch faulty (Vehicle with automatic transaxle only) Fusible link blown Starter motor faulty Ignition switch faulty Ignition lock switch faulty REMEDY Charge or replace battery Repair or replace cables Adjust or replace switch Replace fusible link Repair starter motor Replace ignition switch Replace ignition lock switch

May 20, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...