An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: can't start the car
Your car is not getting started by ignition so there is two option is available :-
1> open bonut of the car and shot dynmo motor coneection
2> open connection of the ignition and shot togather and check it .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This can happen if the battery is low / dead. To solve, connect a set of jumper cables between the battery in the Cobalt and a running car's battery. Shut off the running car. In the Cobalt, make sure all accessories (lights, radio, fan, etc.) are off. Step on the brake, then move the gear shifter fully into the PARK position. Next, either attempt to start the engine, or turn the key to the OFF position and remove it from the ignition.
If the wrong key was inserted it may have bent a tumbler pin,maybe try some wd-40 or similar and work it with the right key,might drop the tumbler back,,if not the whole ign. cylinder will have to be changed
Sounds like the alternator is going out the slow way.
Youre kinda lucky because almoat all alternators go out without warning.
Most Autozone shops or places like it will run a test for free.
Do the ignition lights come, Lights, etc??? It could be the ignition switch, maybe the eletrical switch is stuck in Aux even though you are turning the key in the barrel, you may not be turning the electrical switch underneath. Hope this is helpful. Ian