- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It appears to be the mutifunction switch. (Turn signal control). That, plus the 3 words in parenthesis wil come to 699.00 bucks. then we add the switch.... Just kidding. The multi finction switch is defective and about to fail altogether.. Sorry.
Hazard light switch... They all intermingle in operation. My ex wifes 96TC was doing the same thing... I could OCCASIONALLY get the hazards to work by turning the hazard switch on/off like 10 times in a row and suddenly it would fix... finally bought a new switch
you could either have a front marker/signal lamp w/lamp grounded and causing this,remember...when tail lights are on so are your frt parking/marker lights on also..... other than that you could have a feed wire worn thru and grounding out to the frame
I had the same problem twice before. Solved it the same way both times. In my case it was the Hazard switch at the top of the steering column. It was stuck. I knew it was that because the signal lights had been functioning perfectly until I parked my car alongside the road with the hazard lights on to do some nighttime fishing and sip a little white lightnin'. (just kiddin' about the white lightnin')
When I got back in my car to go, I turned off the hazard lights but I had no turn signal lights! So I kept pushing that hazard button up and down for about 30 times with my left turn signal arm down until it started working again. So after having this happen to me twice, I learned a valuable lesson: Don't ever use hazard signals in this car.