- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there are 2 ways to find out on most jeeps, some only 1.
did you lose the operators guide?
it answers this?
1: the EVIC display tells you. EVIC= Electronic Veh. info Center. (its a day 1 option(new cars)
2: works on all jeeps, use scan too to see this error (DTC)
It is low on coolant and needs to be charged. Go to local autozone and they will set you up with what you need and tell you how to do it. It is very easy to do and if you ask them alot of times they will do it for you....hope this helps and good luck
at the front of the power steering pump you will see a nut over a slot loosen that up on the back side of the pump the is another bolt in a slot loosen that up and the one above it as well under the pump there is a bolt using a socket tighten this screw this will tighten the belt. Retighten all the other bolts wehn done do not over tighten the belt it will ruin the bearing and case early belt wear.
Check with faxonautoliterature.com. They list a couple of wiring diagrams for 1984 Jeeps although they don't specify Renegade. These are official Jeep dealer diagrams for $29. I've used them before and had excellent service. Hope this helps.