Question about 1997 Buick LeSabre

2 Answers

CHECK ENGINE BULB REPLACEMENT

CAN YOU TELL ME HOW TO CHANGE THE BURNT OUT CHECK ENGINE LIGHT BULB ON A 1997 BUICK LESABRE. 3.8 ENGINE. IT IS THE UNDER THE HOOD TYPE.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Thanks for the input, I figured out the removal. My bulb was a soldered in
LED. I went to Radio sh. and bought a 3.3 v LED and installed it. Still not working. I haven't finished checking the fuses. No manual available, too limited production. **** Pontiac Aztek! There's a company close by that
works on gauge clusters.....My next plan.

Posted on Oct 27, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 136 Answers

You have to take all the facia off the dash - and then pull the dash cluster out. It is a long hard job for a light bulb. When you take the dash out don't forget to undo the speedometer wire and then the wire plugs on the left and right upper sides of the dash unit.

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix the brake light on a 1997 Buick LeSaber.


I just did a 97 Regal yesterday and yes you are correct...the strip must be removed to gain access...depending on model you may have to remove the cushioning panel (piece of upholstery panel) on the inside of trunk lid...follow this video URL as it explains the removal better in video form than written..basically remove the 7 10mm nuts holding panel on, lower trunk lid a little and wiggle panel off, twist socket and remove to gain bulb access..install is reverse procedure ...Regal, Century and LeSabre are all same idea/setup Tail Light Change 1997 2005 Buick Century 2004 Buick Century Custom 3 1L V6

Mar 16, 2015 | 1997 Buick LeSabre

1 Answer

My high beams will not go off once I turn them ON...1997 buick lesabre


I believe you need to change the relay. It should be in the fuse/relay box under the hood. Sometimes there just numbered your owners manual should tell you which one it is.

Jun 21, 2010 | 1997 Buick LeSabre

1 Answer

How to disassemble dash to replace check enginge bulb


Are you sure the check engine light bulb is out. This isn't something that you see go out. If is really is out you will need to take the whole spedo assembly out and the find the check engine light bulb and replace it.

Mar 09, 2010 | 1997 Buick LeSabre

1 Answer

How do I change the bulb(s) for the lights in the trunk of 1997 Buick LeSabre? Driver's side light is out.


open up trunk there is a place where you can loosen up the light panel take that off and you can get to the lights

Jan 20, 2010 | 1997 Buick LeSabre

1 Answer

How does one replace the low beam healdlight bulbs on a 1997 Buick LeSabre?


U have to go under the hood of the car an there should be the light bulb encasing that holds the bulb turn it to the right or the left it will come out .most newer cars low beam an high beam bulb are to gether as one bulb .

Nov 27, 2009 | 1997 Buick LeSabre

1 Answer

Need Mass Air Flow Sensor for my 1997 Buick LeSabre Custom


not unless you take it to autozone and have them put the scanner on it and clear the code which caused the light to come on. also they can tell you what the original issue was.

unfortunately it sounds like you just started to replace parts and honestly you could have already repaired the issue

May 04, 2009 | 1997 Buick LeSabre

2 Answers

Change bulb right rear blinker 2000 buick lesabre


you have to open the trunk take the carpet off right next to the very back of car undo the 3-4 plastic wing nuts take light off of car change bulb ......reinstall reverse of taking off

Mar 22, 2009 | 2000 Buick LeSabre

1 Answer

Engine Problems


First thing is to have it scanned and identify the code. Codes are available on the internet. Should tell you what components need replacement

Poppascott

Sep 06, 2008 | 1997 Buick LeSabre

Not finding what you are looking for?
1997 Buick LeSabre Logo

763 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...