Question about 1995 Nissan Maxima

1 Answer

REMOVING MY FRONT SEATS FROM MY 95 NISSAN MAXIMA

HOW DO I REMOVE THE FRONT SEATS FROM MY 95 NISSAN MAXIMA..... MY ROD IS DIRTY AND I NEED TO GET IT OUT AND WASH IT BUT DON'T DON'T KNOW HOW TO REMOVE MY FRONT SEATS

Posted by on

  • Anonymous Mar 23, 2014

    second row seating removal?

  • Anonymous Mar 30, 2014

    REMOVE REAR SEATS

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 705 Answers

There are 4 bolts holding the seat to the floor. 2 in front and 2 in rear. You will need 14mm socket and ratchet or wrench. You will also have to unplug some connectors under the seat, before you take it out of the car.

Posted on Jul 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BCM on 1995 nissan maxima where is it located and does it have major role when starting vehicle, the starter is not turning over when key is turn to start position.


i got a 95 maxima it has no power on the inside the windows wont work the seats the blower motor or the radio wont work either done checked all fuses and relays they are good what could it be

Aug 25, 2010 | 1995 Nissan Maxima

1 Answer

Need to replace the headlight bulb (drivers side) in my 1999 nissan maxima. what are the steps?


using a flashlight or drop cord, look under left front fender or under hood, for a pull out receptacle which will be dirty, dusty, turn the unit left or right to remove from the headlight socket, remove bulb unit, install new bulb and reinstall the reverse of removal...

Aug 07, 2010 | 1999 Nissan Maxima

1 Answer

How do you remove the front wheel hub?


Hope this diagram helps:

Exploded view of the steering knuckle and hub assembly


f891ebe.gif

May 04, 2010 | 1995 Nissan Maxima

1 Answer

Nissan Maxima'96 - remove dash console


for center console removal start furthest point from dash move seats forward and look for screws of either side of console. may also be in storage area of console. remove back section first which will reveal screws for front which should reveal screws for area that holds cig lighter and such

Apr 24, 2010 | 1996 Nissan Maxima

1 Answer

Need to replace the front drivers seat in a 1990 Nissan Skyline


easy.Remove the mounting bolts at the front and rear of the seat 2 front,,2 rear seat should just come out

Oct 23, 2009 | 1990 Nissan Maxima

1 Answer

I need to remove the backseat of my Nissan Maxima-2007 3.5SE..I dropped a small ring down the back of the leather seat..I have tried to use a vaccum , no luck..


Typically, seats jamb fit at the rear and have a spring piece that engauges at the front. To realease, the seat gets moved rearward about 1/2 inch and then pulls up in the front.... Compress the rear of the seat and it takes kind of a lot of force to move the entire seat rearward, but that is what you do....

Sep 20, 2009 | 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

95 maxima O2 sensor


Unless you have torches,take it to a garage, if you screw up the threads you are looking at a new pipe, if it is the front sensor it will be ahead of the cat converter,on some models you can open the hood and look down at the exhaust and see it right there.you will also need a speacial socket to remove this or if you are sure,you can cut the wires and use a 7/8" box end wrench.Your car is 14yrs old so don't ecpect it to "turn right out"

Mar 24, 2009 | 1995 Nissan Maxima

2 Answers

95 maxima fuel injector..


unplug each injector one at a time and use a multimeter to check the resistance between the terminals on the injector. they should read 10-14 ohms

Jan 27, 2009 | 1995 Nissan Maxima

Not finding what you are looking for?
1995 Nissan Maxima Logo

Related Topics:

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63578 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...