Question about 1984 Nissan 300ZX

1 Answer

No fuel through the injectors

When i would drive it the car would shut off. then one day i go out there it wouldnt start at all i have plent of spark and fuel but nonething through the injector i can strart it with starting fluid but it wont stay started

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You'll need to check your fuel filter, because if it gets clogged up then it won't let any fuel through. You can check it by taking it off and seeing if the gas looks normal or really dirty. These fuel filters are pretty cheap. And see if your fuel pump is working, and make sure that the injectors are spraying, you might also want to get some fuel injector cleaner.

Posted on Jul 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 crown victoria cranks wont start, was running fine, just cut out.never started again


As with any no-start situation, you need to know if you have spark to the plugs, fuel to the injectors, and normal compression to proceed.

Jan 28, 2013 | 2003 Ford Crown Victoria

1 Answer

I have an 88 mercury grand marquis sterted drove all day went the next day car wouldnt start someone told me timeing chain jumped replaced that replaced starter selinoid stater spark plugs router router...


Lets start at the beginning.
Did anybody check to see if the timing chain was really in need of replacing ?
Did you replace the starter and solenoid because it would not crank ?
Is it now getting spark to the plugs, and fuel to the injectors ?
Are the injectors getting voltage and a ground signal from the computer ?
Do the cylinders have proper compression ?
Is the rotor in the distributor turning when you crank the engine ?

Jan 15, 2013 | 1988 Mercury Grand Marquis

1 Answer

No injector pulse on 94 grand am 2.3dohc


Fuel pump relay may be weak. Try removing the connector from the oil pressure switch and connecting the terminals together so as to bypass the switch.
if this works, replace the relay.

0900c1528025f999-w4b4mlj24aijk5uz5dqx0bra-4-0.gif

Jan 10, 2018 | Pontiac Grand Am Cars & Trucks

1 Answer

2007 jeep patriot turns over but wont start. no fuel to fuel rail. Would start then did ran fine for a day . shut off at work and wouldnt start again. Checked all fuses put more fuel in tank. tried battery...


need a fuel system chec-the gas pump and the regulator-also the injector pulses may be failin--find an honest mech that can testum with instruments

May 31, 2011 | 2008 Jeep Liberty

1 Answer

97 malibu ran outta gas suposedly will not start after adding gas


Your issue is with either spark or fuel delivery and you need to check the components in each system for proper operation. Such as pump, cables, camnshaft sensor, igniter, etc.

Aug 11, 2017 | Chevrolet Malibu Cars & Trucks

3 Answers

I have a 1990bmw 325i. i turned the car off one day. ran in the store. ten minutes later came out and the car wouldnt start. left the car. came back thirty minutes later the car started. drove the car 25...


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Dec 14, 2009 | 1990 BMW 3 Series

1 Answer

2008 nissan starting problems


check spark plugs and wires out first. was there alot of moisture in the air? use some fuel injector cleaner in gas tank

Mar 08, 2009 | 2002 Nissan Altima

1 Answer

1991 dodge daytona wont start


sounds like low fuel pressure have it ckecked

Feb 09, 2009 | 1991 Dodge Daytona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...