Question about 1997 GMC Jimmy

1 Answer

Cruise control does not activate and fuse is good

Posted by on

  • 3 more comments 
  • Anonymous Sep 18, 2008

    Same problem-cruise control stopped working and fuse is good.

  • whb52ford Oct 19, 2008

    Same problem, fuse is good, no cruise control

  • Anonymous Oct 21, 2008

    cruise control stop working

  • Anonymous Jan 26, 2009

    I have the same problem, I replaced the turn lever switch, no help, checked all wiring all good, checked fuses no help. It worked at one time but would lose speed on hills. Any ideas anyone?

  • Anonymous Apr 02, 2009

    Same thing Fuse good no Cruise
    Anyone know how to fix it

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • GMC Master
  • 3,854 Answers

I had the same problem and it's the electronic speed control modual on the fire wall. Just follow the thortle cable to the speed control behind the break booster. I did the junk yard special when i got the price at the dealer.

Posted on Apr 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can the clock spring keep the cruise control from activating . Low voltage to cruise servo .Nothing activates .all fuses good .


Your year--make--model didn't post for some reason? I wanted to look up wiring diagram. I wanted to check voltage to and from steering column for the cruise system.
Where applicable, a clock spring can effect just about anything.

Jan 04, 2016 | Cars & Trucks

1 Answer

Cruise control won't engage


cruise controls are governed by 5 settings and sensors
one is engine rpms
vehicle road speed ,( manual transmission will not activate under 20 klms /hr
brake pedal switch
clutch pedal switch ( VSS if auto)
off/on switch control
any one of these not lined up will not allow the cruise control to work

Oct 13, 2015 | 2013 GMC Sierra 2500HD

1 Answer

Where is the fuse for cruise control on a 2003 envoy


It is HVAC 1fuse #39 in the rear fuse block ,this powers the on/off switch for cruise control ! Fuse Block - Rear Beneath the left rear seat. What engine does it have ? 4.2 L or 5.3 l There is no vacuum involved in the operation of the cruise control ! Your vehicle has electronic throttle control .
Cruise control is a speed control system that maintains a desired vehicle speed under normal driving conditions at vehicle speeds above 40 km/h (25 mph). Steep grades may cause variations in the selected vehicle speeds.
The following are the main components of the Cruise Control System:
?€¢
The powertrain control module (PCM)


?€¢
The On/Off switch


?€¢
The Resume/Accel switch


?€¢
The Set/Coast switch


?€¢
The TCC brake switch


?€¢
The stop lamp switch


?€¢
The throttle actuator control (TAC) motor


?€¢
The vehicle speed sensor


Cruise Control Engaged
The cruise control system will engage and adjust the vehicle speed based on the activation of the following cruise control switches:
?€¢
On/Off


?€¢
Resume/Accel.


?€¢
Set/Coast

The cruise control switches are located on the multifunction/turn signal lever.
The powertrain control module (PCM) monitors the signal circuits of the cruise control switches in order to determine when to capture and maintain the selected vehicle speed. The PCM uses the throttle actuator control (TAC) module motor in order to control the vehicle speed. For further information on the TAC System, refer to Throttle Actuator Control (TAC) System Description in Engine Controls - 4.2 L.
Ignition positive voltage is supplied from the 10 ampere HVAC 1 fuse to the cruise control switch via the ignition 3 voltage circuit. When the normally open cruise control On/Off switch is turned On, the switch closes and the PCM detects a high signal voltage on the cruise control on switch signal circuit. When the normally open Set/Coast switch is pressed, the switch closes and the PCM detects a high signal voltage on the cruise control set/coast switch signal circuit. To engage the cruise control system, turn the On/Off switch On and momentarily press the Set/Coast switch. The PCM will confirm that the cruise control enable criteria has been achieved. The PCM will engage the cruise control system and record the selected vehicle speed. The PCM sends a class 2 message to the instrument panel cluster in order to illuminate the cruise control indicator. Pressing the accelerator pedal, while the cruise control system is engaged, will allow the driver to override the cruise control system in order to accelerate the vehicle beyond the current set vehicle speed. When the accelerator pedal is released, the vehicle will decelerate and resume the current set vehicle speed. The driver can also override the current set vehicle speed via the Set/Coast switch and the Resume/Accel switch. When the cruise control system is engaged, pressing and holding the Set/Coast switch will allow the vehicle to decelerate from the current set vehicle speed without deactivating the cruise control system. When the Set/Coast switch is released, the PCM will record the vehicle speed and maintain the vehicle speed as the new set vehicle speed. When the cruise control system is engaged, momentarily pressing the Set/Coast switch will allow the vehicle to decelerate at 1.6 km/h (1 mph) increments for each time that the Set/Coast is momentarily pressed, with a minimum vehicle speed of 37 km/h (23 mph). When the normally open Resume/Accel switch is activated, the switch closes and the PCM detects a high signal voltage on the cruise control resume/accel switch signal circuit. Activating and holding the Resume/Accel switch, when the cruise control system is engaged, will allow the vehicle to accelerate to a greater vehicle speed than the current set vehicle speed. When the Resume/Accel switch is released, the PCM will record the vehicle speed and maintain the vehicle speed as the new set vehicle speed. When the cruise control system is engaged, momentarily activating the Resume/Accel switch will allow the vehicle to accelerate at 1.6 km/h (1 mph) increments for each time that the Resume/Accel switch is momentarily activated, with the maximum acceleration total of 16 km/h (10 mph) over the current set vehicle speed . Momentarily activating the Resume/Accel switch, after the cruise control system has been disengaged by pressing the brake pedal, will recall the previous set vehicle speed that is recorded in the PCM.

Sep 11, 2015 | Cars & Trucks

2 Answers

My cruise control stoped working, my speedometer still works


cruise control have there own fuse check that ,make sure it is still hooked up to throttle ,check vacuum lines and power plugs , your speedo has nothing to do with cruise,also check that it is activated,test horn ,YES horn and cruise use same relay ,make sure your brake pedal is retracted ,and that brake lights work as well, good luck with it if I can be of further help get back to me ,hope I helped you.
Woody

Aug 27, 2014 | Cars & Trucks

1 Answer

Cruise doesn't work. Checked fuse and its good. Does this truck have a self diagnosis or do I need to rely on Chevrolet to fix?


Before you go to the dealer check your stop lights including your cyclopes. Cruise controls use brake lights for resistance to activate cruise.

Dec 19, 2013 | 2001 Ford F150 Styleside SuperCrew

1 Answer

2006 Lincoln Town Car - Cruise Quit Working


check the adjustment under the clutch and brake pedals If the rubber stops are a bit dodgy then the pedal will not activate/deactivate the controls for the cruise.

Apr 28, 2013 | Cars & Trucks

1 Answer

Cruise control inop


if the cruise control does not activate. Check the cruise control fuse. Do a visual check of all wiring relating to the cruise control system. Visually inspect the brake (and clutch if so equipped). If these are out of adjustment, the voltage cannot get to the components down stream with enough power to operate the cruise control.
Visually inspect for vacuum leaks in the release hose and valve, If the cruise control system fails to maintain the set speed, check the throttle linkage adjustment.

Jan 24, 2012 | 2009 Dodge Caliber

1 Answer

Everything works (cruise buttons and dash indicators), but it just won't activate cruise. at all. the fuse is on a relay and it's controlling other things that are working fine.


If you have a transmission or emission trouble code stored on some models it will disable cruise.Also I have seen the cable that goes from cruise box to throttle become detached.Good luck.

Feb 26, 2011 | Ford Escape Cars & Trucks

1 Answer

This problem is on a 1998 740iL. When I press the steering wheel cruise control activator - the green indicator light comes on but when I press the "set" (+) button it does not engage and the car does not...


my BMW 740i has a problem with the cruise control.
The cruise control will work for about 20 miles and then quit working and will not work again.

May 17, 2010 | Cars & Trucks

3 Answers

Cruise control Fuse location 2008 chevy cobalt


check you brake lights. if a light goes out your cruise control wont work.

Mar 04, 2010 | 2008 Chevrolet Cobalt

Not finding what you are looking for?
1997 GMC Jimmy Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...