Question about 2000 Lincoln LS

1 Answer

2000 lincoln ls 3.0 v6

My engine was just rebillt but it like has no power .I have a code po351 I change #1 coil pack test it and the spark plug and compression all is good. its geting spark gas an compression what could it be ?

Posted by on

  • Anonymous Mar 17, 2014

    number 1 cylnder has good compression good spark . plug is soaked after running 1 min.engin not firing on that cylnder, loading oil with gas

  • Anonymous Mar 20, 2014

    how to change the spark plugs

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

  1. check exhaust system for obstructions ie: clogged catalytic converters,plugged mufflers
  2. check ignition timing

Posted on Nov 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Lincoln LS v6 no spark on plug


B+ voltage at the coil pack ? Test crank sensor signal to PCM , videos on youtube ! What engine ? 3.0 l or 3.9 l ? Coil on plug ignition ? Check fuse F1.12 10amp located in the Under hood AUX junction box . Autolite Coil on Plug Ignition troubleshooting

Feb 19, 2017 | 2003 Lincoln LS

2 Answers

Getting trouble code p0301


Code 301 means cylinder one is not producing power.
Problem could be ignition, fuel, or mechanical.
If compression is good on all cylinders, check the fuel injector.

Mar 08, 2015 | 2001 Ford Explorer

2 Answers

How to check a ignition coil pack to see if its good,


the coil does not crank the engine , the starter does that, sorry.
(if you ever had to hand or foot crank and engine , youd under stand that. (like motor cycles or boat engines, or per 30s cars.)

in fact will crank all day with no spark parts on car..

x2, the scan tool does tell you why there is NO STARTS, CRANKS OK. The pcm can detect, one missfire in 10 cmp;ckp signals.
  • CRANK FOR 5 SECONDS
  • release, key
  • scan tool has DTC errors?, read the believe them.
no engine stated of 4 or more,

U checked everything but spark,
why, check spark at all cylinders, all most fire or the engine will not run or stall.
That test be first, if not starting (AFTER SCAN TEST)

IF NO spark fuses are next , not last.
lets do no start fails tests. (cranks perfectly 200 to 300 rpm)
  1. : check fuses
  2. key on, CEL lamp must glow, if not , ECU fuse blown.
  3. crank with scan tool , see P03xx DTC errors, see RPM dead.?
  4. check for spark? got spark x4 or times number of cylinders?
  5. got spark try test fuel now, runs for 3 seconds?
  6. yes, runs on test fuel now means lost fueling
  7. no, dont run on test fuel, means, 1 to 5 done wrong above or engine compression bad.
  8. bad fueling, huge number of tests. check fuel pressure now.
confused, try a shop and watch them, learn.

Jan 12, 2015 | 2005 Suzuki Forenza

1 Answer

Where is spark plug located on lincoln ls 3.0eng 2002



The spark plugs in the v6 can become an involved job as the upper intake manifold. The LS uses a Coil on Plug (COP) ignition system, meaning that the spark plugs are located under the ignition coil

Apr 04, 2014 | 2002 Lincoln LS

2 Answers

2008 Cadillac CTS returning P0303 after replacing spark plug and coil pack


Error Code: P0303
Description:
Cylinder 3 - Misfire Detected
Possible Cause:
Wiring harness, igniter and fuel injector connectors.
Ignition system. (Spark plugs gaps)
Fuel injector No. 3.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression, cylinder No.3. (check valve clearance and throttle plate for excessive wear)
Engine control module (ECM).

Feb 27, 2014 | 2008 Cadillac Cts

2 Answers

Po351 code car runs fine for the first several miles but then stumbles & misfires at the first 1000 rpms


Here is the code description and the possible causes for the code.


dttech_153.gif
Then, with all that being said, the MOST LIKELY cause of your problem is an ignition coil breaking down after it heats up and is put under load.

Aug 03, 2011 | 2003 Lincoln LS

1 Answer

Engine light comes on code 308


P0308 is cylinder misfire detected, cylinder #8. Causes can be: bad spark plug, bad coil pack, faulty fuel injector, poor compression, faulty computer..I generaly recommend changing spark plugs first. Then test the coil pack, after that I would look at the injector, I have never seen a bad computer throw this code.

Jul 27, 2011 | 2004 Ford F150

1 Answer

2004 dodge intrepid.2.7 engine. #1 misfire.coil good.plug good. have not done a compression test yet. ( will soon) I cant get to the injector.how can i get i test the injector?I have a scan tool which...


Hi, if the injector is not on the data list of the scan result then you have no reason to try and test the injector which can be located with the help o the car user manual...
The cause of misfiring #1 cylinder may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer

If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

I will also strongly suggest you carry out the compression test........

Jan 30, 2011 | 2004 Dodge Intrepid

Not finding what you are looking for?
2000 Lincoln LS Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...