Question about 1998 Pontiac Sunfire

Open Question

Codes P0335 and P0342

Little hard to start--turns over a few times before starting

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix P0335 and P0727 error codes for Cadillac Catera 2000?


P0335 is a code for a faulty crank angle sensor. When this sensor starts going bad, usually the car will not start till it cools down, may cause rough running or no start at all. P0727 is a communication error between the engine control module and the transmission control module. Check for any bad connections between both modules.

Jul 22, 2016 | 2000 Cadillac Catera

1 Answer

P0335 P0300 - 4 cyl


Question: where did you buy the new crank position sensor? I had the exact same problem with my 2004 Nissan Altima and bought new crank position sensor from one of the auto parts store. Put it in and same problem. I was baffled. Finally decided to get the crank position sensor directly from the dealer. Fixed the problem. This was my experience, not sure if your case will be the same.

Dec 13, 2013 | 2002 Mitsubishi Galant

1 Answer

P0342


Could be a timing belt. P0342 Camshaft position sensor "a" circuit low input, Read all of the comments on the URL below.
Car silently stalls after startup and then won start back up Hyundai...

Nov 10, 2012 | 2005 Hyundai Santa Fe

1 Answer

2004 tahoe hard startig OB 2 code P0342 showing


Yes that would do it.
Someone would need to test the sensor and the wiring to see if the sensor has failed.

Sep 30, 2012 | 2004 Chevrolet Tahoe

1 Answer

1999 PONTIAC GRAND AM AUTO SCANN CODE


Po300 is a misfire probably all three caused by a faultymap sensor

Aug 27, 2012 | 2002 Daewoo Lanos

2 Answers

P0335 hard starting


that trouble code indicates that crankshaft position sensor circuit has a fault.
check that the 3 wires on the sensor are in tact and area around it is free of oil and deposits
it that doesnt work then you will need a new sensor

May 07, 2012 | 2001 Volvo V70 XC

1 Answer

89 F-150 5.0 EFI I got spark, Got fuel, Turns over but Wont start...Any ideas?


if truck does not start it sounds like a bad crank sensor! have it scanned to be sure. a bad crank sensor as it controls timing more than likely engine will not start at all. engine back fire or irregular rpm function. no start and no pulse to injectors, car will stall when stopped. p0335 to p0342 are the sensor problem codes.

Aug 21, 2010 | 1989 Ford F 150

1 Answer

Trouble codes po335and po342 car runs fine but shows these trouble codes


P0335 - Crankshaft Position Sensor "A" Circuit
P0342 - Camshaft Position Sensor "A" Circuit Low Bank 1 or Single Sensor.

Click the code links above to access more information that pertains to the codes you posted.

Jul 06, 2010 | 1997 Pontiac Sunfire

1 Answer

99 max no start p0335


The P0335 refers to the electrical circuit and not necessarily the sensor. Please see this article for full details - P0335.

Feb 06, 2010 | 1999 Nissan Maxima

1 Answer

I was driving and heard a pop noise and then my 97


could be the timing chain. Was it a pop or more like a ping . A ping could indicate a timing chain problem. The tensioner might have gone bad.
its not hard to replace for an experienced mechanic

Jul 05, 2009 | 1997 Pontiac Sunfire

Not finding what you are looking for?
1998 Pontiac Sunfire Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...