Friends I need to find a (TR Sensor or switch a-park&Neutro) for Suzuki Forenza, I am trying to find where I can buy it, I am in Latin America and here I Can find I you Know some store where I can make wholesale please let me know !! Thank you!!
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sounds like it maybe your linkage have you ever had any work done on your ****** just a small adjustment can cause a lot of problems also there is a sensor that tells your car wether the brake is ingaged or not when putting it into park sometimes those sensors go bad
DTC P0705 - Transmission Range (TR) switch circuit malfunction (short to power supply)
DETECTION CONDITION • Two or more range signals are input from the TR switch for 12 s or more.
Diagnostic support note: • This is a continuous monitor (CCM). • MIL illuminates if TCM detects the above malfunction condition in two consecutive drive cycles. • PENDING CODE is available. • FREEZE FRAME DATA is available. • AT warning light illuminates. • DTC is stored in TCM memory.
POSSIBLE CAUSE • TCM malfunction • Short to power supply in wiring harness between TR switch terminal A and TCM terminal 1D • Short to power supply in wiring harness between TR switch terminal E and TCM terminal 2C • Short to power supply in wiring harness between TR switch terminal D and TCM terminal 2B • Short to power supply in wiring harness between TR switch terminal G and TCM terminal 2E • Damaged connector between TR switch and TCM • TR switch malfunction
Inspect swtich harnesses and test with OBD scanner reader tool.
My wife had 2007 suzuki forenza with the same problem , I look it over, the problem was the brake light switch. I Bought a new one at suzuki dealer in orlando for $15.10 part # 37740-86z21 and replaced it my self , it took less than 5 munites to replace.works great now.The reason the gear would not shift out of park is that the brake switch has to send a signal to the relay switch on the gear shifter to remove the shift lock .If this switch is not working it can not send that signal to the relay.Another way you can tell it is the brake light switch is that your rear brake light would not work .You can also bypass this and use your car until you get the brake light switch , here how .look at your gear shifter and locate a small oval shaped cut out (it may have shift lock written next to it ).take a small flat screw driver or some thing Similar and pry out that little plastic incert .Then when you start your car and you are about to shift out of park place a key of any a small screw flat driver into the hole and push down and shift out of park.Once out of park you can shift to any gear if you return the shifter to park you would have to incert the screw driver again.If you need to locate the brake light switch just follow your brake pedal up under the dash board it will be a small white plastic switch attached above the btrke pedal .IT is very simple to replace ,when you locate it just twist it anti clock wise and it will come off , then press the clip in the plug and remove the brake switch from the wire harness.To replace the new one just press the brake pedal down place the switch back where the old one came off and twist clock wise until it snaps into place.and replace the wire plug.REMBER When you get your new brake switch DO NOT press it down or it will get stuck.IF this happens just pull it back it out.and do not buy this part at any auto parts store because the connecter woul be smaller .go to a suzuki dealer ....THEN WHEN YOU FIX THIS PROBLEM GET RID OF THE CAR THIS IS ONLY THE START FOR PROBLEMS TO COME ...GOOD LUCK..
The PARKING NEUTRO SWITCH. ( neutro safetly switch).
If you car is an Auto, trans. is a little switch located on just
alittle upper of the trans. on the radiator side. use a Connector of 3 wires. And the switch is Thread installed.
But if your trans is MANUAL.
The switch is on the Clutch Pedal Base.