Question about 2001 Chevrolet Venture

1 Answer

2001 chevy venture lost key

I own a 2001 chevy venture that has a key with a transponder chip in it.The key is lost and I can't afford to get it towed to a dealership to have a new key cut and reprogrammed is there any thing else I can do?

Posted by on

Ad

1 Answer

You must get a new key from the dealer. Bring in the registration, and photo I.D. Then they will cut you a key. After that, try this procedure....

  1. With a master passkey III key (Black), turn ON the ignition, with the engine OFF.
  2. Observe the Security telltale, after approximately 10 minutes the telltale will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. With a master passkey III key, start the vehicle. The vehicle has now learned the key transponder information and the PCM has now learned the fuel continue password.
  6. If it does not work, you will need to get it to the dealer.
GM technicians on-line

Posted on Nov 08, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bypass ignition switch on 2006 nissan maxima 3.5 lost keys


Hello Jam mmmm,

I have seen products that allege this can be accomplished...

And frankly... IF COST WERE NO OBJECT...
and YOUR ELECTRONIC SKILL peerless...
I don't doubt that t could be done.

However...

back down here in this vale of REALITY...
Your options are call a locksmith to where you are or
have your car towed to a DEALERSHIP and pay twice
as much...

If you get on AMAZON or eBay and check how little it would have cost to AVOID your current situation ... it would be MOST VEXING... my best cut charge = $6

Regardless ... do shop around: you can still save HUNDRES merely by checking & weighing your options.

2006+nissan+altima+transponder+key
Keyless Entry Remote amp Uncut Key Chip Transponder Ignition Nissan 2002...

2 New Keyless Entry Remote Fob amp Uncut Chip Transponder Ignition Car Key...

Carnac the Magnificent

Jan 10, 2017 | 2006 Nissan Maxima

2 Answers

2001 chevy cavalier lost key can I replace the ignition switch without a key?


the original key is coded to your car.
So changing the barrel to have a new key wont help and ill tell you why.
Inside the original key is a transponder chip that is programmed to the cars immobiliser unit.
Attached to the ignition barrel is whats called a reader coil and its job is to read the keys chip when inserted in the barrel to deactivate the immobiliser so that the car will start.
What you need to do is contact a good knowlegable locksmith to provide a new key and code it to your car

Nov 03, 2016 | Cars & Trucks

1 Answer

Does an 87 chevy suburban have a chip (not an ecm) for the tbi? And if so where is it located?


Chevy Suburban replacement key ? Mile High Locksmith ™

www.denver-locksmith.net/2013/.../replacement-key-for-chevy-suburba...
If you have lost your key to your Chevy Suburban, and have no spare, the cost of ... 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, ... and 2013 then your Chevy Suburban will require a transponder chip key.

Chip it! Finale- - YouTube

? 3:41
https://www.youtube.com/watch?v=CSFR7XldItE
May 23, 2010 - Uploaded by pearsonba350
Final installment of my Jet Performance chip install on my '94Chevy truck. ... Just throwing it out there i ...

Nov 19, 2015 | Cars & Trucks

1 Answer

Will a bad key ignition switch effect the inderctor light on the dishboard


New keys with cylinder may not have a transponder chip , or new keys will need to be programmed. you will require two keys equipped with proper transponder for your vehicle, and either new keys cloned with the old transponders. If you have lost the original keys , you will need someone to remove the original keys from the pcm , than marry the 2 new keys to the pcm. If you have an original key , try placing it by the lock cylinder when attempting to start with the key supplied with the new ignition cylinder.

Nov 08, 2014 | 2001 Ford Expedition

1 Answer

Transponder key programing


the operators guides in the glove box answers all this.
lost that?
ask your suzuki dealer for that,

Mar 23, 2014 | 2005 Suzuki Baleno

1 Answer

Replace ignition lock cylinder


I lost my only key to my 2002 Chevy Venture Mini Van. I replaced the ignition switch. I followed the directions on how to program the new keys that came with the new switch and it didn't work. Does anyone have any suggestions on what to do. Cant afford to take it to a dealership.

Sep 02, 2013 | Chevrolet Venture Cars & Trucks

2 Answers

2001 honda accord keys were stolen and the thief broke into my car. Do I need to totally rekey or can I just reprogram the transponder and have the doors not work with the old key?


Hello Sophie,

FIRST OFF ...
>> I would ALWAYS choose a LOCKSMITH
over a DEALER regardless of cost (strong opinion).

Very sorry to hear of your violation...
It never feels the same but now you are SAFER with the
knowledge ... you were never actualy safe.

If other than your CAR keys were ALSO taken...
YOU NEED TO FOCUS on those other KEYS
FIRST (particularly house & mail-box)

Truth is...
your car is never ANY safer than the GLASS IN THE Door
(and only we... the owners... care about that GLASS).

Car TRANSPONDER locks are another situation.

If you use a LOCKSMITH it will be cheaper & safer.

I have used eBay to get my new KEY and KEYLESS
entry fobs... AND ... would TRUST a LOCKSMITH worlds
better & longer than I could throw a DEALERSHIP...!!

My niece had her car UNLOCKED and her HIGH-END
sound equipment expertly removed THE NIGHT
following getting her HONDA serviced at
OAKLAND HONDA ...
She nor I FEEL it was a coincidence (opinions)...

Where-as...
LOCKSMITHS trade on their excellent REPUTATION
and do the SAME work for half (or less) the COST.

2001 HONDA ACCORD 3 0L V6 Ignition Lock Cylinder RockAuto

REMEMBER to ask them the ERASE/OVERWRITE the
old keys & FOBs.

The locksmiths MIGHT know how to RE-KEY your existing cylinders (I think un-necessary)...
Dealers probably (opinon/experience) won't even TRY...

and of course...
NEVER leave anything of value in your car!!

keylessking
2 Replacement for 1998 2002 Honda Accord Key Fob Remote KOBUTAH2T eBay

OEM transponder keys
2 NEW HONDA ACURA TRANSPONDER CHIPPED KEY BLANK HD106PT 692246 35113 SY8...

If you are serious about this comment me back... I'll pull
your owners manual and look for your capabilities.....
Pretty sure WITHOUT 2 PROGRAMMED IGNITION keys
you can do NOTHING YOURSELF.

ManualsLib Makes it easy to find manuals online

Carnac the Magnificent

May 30, 2017 | 2001 Honda Accord

1 Answer

Hi i own a 2002 chevy venture and I have lost the original key and I was wondering if I could get a key made and program it myself because I dont have the 110 dollars for the dealership to program it. is...


Well, if you still have another working key, you can go to most any key shop or hardware store, they can make a copy for less, perhaps $50 or so. You must have one working key to "train" the computer to recognize a new key. If you lost your last working key, you may be out of luck. Usually you have to replace the computer module, which can cost $1000 or more. If that's the case, see if you can get one from a auto recycler (junkyard) for a more reasonable amount. Then immediately have a duplicate key made and keep it in a safe place.
In any case, replacing a key with a chip in it is more expensive than the old-fashioned mechanical keys.

Apr 26, 2011 | 2000 Chevrolet Venture

1 Answer

I lost my keys and have two new ones just wondering how i program them to my vehicle without going to dealership?


If you don't have an original key you are out of luck and will have to go to a dealership or locksmith to get them programed. If you still have one of your original keys you can reprogram the new ones yourself. Follow this link if you still have an old key.

http://www.ehow.com/how_5029209_program-chevy-transponder-chip-key.html

Feb 24, 2011 | Chevrolet Malibu Cars & Trucks

Not finding what you are looking for?
2001 Chevrolet Venture Logo

Related Topics:

1,430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...