Question about 2005 Dodge Caravan

1 Answer

Which fuse is the right fuse!!

I have a DVD player that needs resetting. It was an after market install. I need to pull the dome light fuse to reset. Can yall tell me which one is for the interior lights??????

Posted by on

  • tidwellellen Aug 09, 2008

    if it was that easy... i could have done it without you!!!!!!!!

    the fuses don't say specifically that one. i pulled them all and i still didn't get the dvd to reset. give me some credit......

    i do appreciate your help, but you obviously don't know the specifics of this vehicle if you didn't already know that - not one fuse said interior (anything).

    thanks anyway!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 60,884 Answers

Look on the underside of the fuse box cover, the fuse location is listed there.

Posted on Aug 08, 2008

  • yadayada
    yadayada Aug 08, 2008

    Come on now you need to do a little work here, you gave me a negative on this, I get paid zip for helping, least you could have done was give a helpful rating, won't assist you again.

  • yadayada
    yadayada Aug 17, 2008

    Come on I never said it was easy, RIGHT?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset /serv.engine soon light


easy, pull the dome fuse.
wait 5min and put back,
DOME = ECU memory NVRAM , power.
killing this power fuse erases all suzuki DTC errors in memory.
the delay is to let capacitors discharge naturally.
or use any scan tool made in USA, and press RESET.

there is a 3rd way but way messup radio programming.'

May 05, 2014 | 1996 Geo Tracker 2 Door

1 Answer

Dome light short


... Sorry to hear about this.
Have you checked all the fuses; to see if they are good?

I would start with checking all the fuses, the dome light bulb and burnt wires. (burnt wires will smell) If you didn't smell plastic burning while hooking up the DVD player, then you're okay. But check anyway.

If you can't solve the problems, call the Toyota service department for help. They may be nice and give you some help.

Good Luck!

Apr 01, 2014 | 2004 Toyota Sequoia

1 Answer

Replaced radio cant reset airbag light no communication


and you forgot to defeat air bags doing this service
you do know they can kill right? why do that.
the FSM has warning on every page for that. heed it.
why not now, get the car serviced for bags and make it safe.
but first check all fues, my guess, wild, is you blew the fuse.
skipped the FSM rule step one pulling battery neg lug before any electric service. so you skipped them both.
or you wired in a short circuit and now the fuse blows full time.

Mar 31, 2014 | 2005 Jeep Grand Cherokee

1 Answer

No dash lights or tail lights on my 1994 honda accord ex


I have right now the same problem. I just pulled the fancy/shmancy radio head out of my (Honda) 1992 Acura Integra and the whole dash is now a mess. It had been professionally installed. The dome light now doesn't work, the "door open" warning lights stay on, the clock is messed up, etc.
I installed the fancy head in another car, in a 1992 Honda Civic. That works perfectly. Sounds like you need to find a professional installer to re-do your new head.
I think the dash lights and the taillights are on the same circuit/fuse.

Jan 01, 2013 | 1994 Honda Accord

1 Answer

Service lights


Hi, if your 2006 Audi A6 service light is coming up, you have to reset it by following the instruction below..


If your instrument cluster has 2 knobs, one on each side (Older A4's, 1998-2004 A6's, TT's up to ~2006):
Press the right knob and hold it, turn the ignition on, release the right knob and press the left knob, the display should change to service in ----- miles. Or....


Press the right knob and hold it. Turn the ignition on and release the right knob and pull the left one. Then, push the right knob again and pull the left knob again. The display where the mileage is shown should change.


If your instrument cluster has a little wrench on a button on the right (2002-2008 A4's):
Press and hold the wrench button. Turn the ignition on, release the wrench button and press the 0,0 button next to it. The center display should change.


If you have a older body A8, you may be able to reset without a scan tool. Press the 0,00 button on the right of the cluster, turn the ignition on and release the 0,00 button and press the "M" or "Mode" button on the left and it should reset. If this does not work, or you have a 2004 or newer A8, it will probably require a scan tool.


If you have a much older or newer Audi, or certain A8's, you need a scan tool or a special made service light reset tool, available online. You can also purchase af, ter market software and a adapter lead for your laptop and use that. The reset tools will come with instructions. The After market software will go as follows:
On most older vehicles, enter vehicle self diagnosis. Go to #17: Instrument cluster. Go to adaptations, and change the following adaptation channel numbers to the number listed next to it, following the on screen prompts to save and accept.
Channel 5 --> 12
Channel 6 --> 24
Channel 7 --> 36
Channel 8 --> 72


If you have a A3, 2009+ A4, 2005+ A6 or 2004+ A8, or a Q7 and are using the after market software:
Go to guided functions, go to service work, go to reset service light, or something of that nature, and follow the on screen prompts.

Jan 10, 2011 | 2006 Audi A6

1 Answer

I bought big rig lights for my 2008 F150. I followed instuctions


you need to connect to the actual dome light ,the one that feeds the bulb

Mar 08, 2010 | 2004 Ford F150

1 Answer

The previous owner installed an after market Alpine CD player, It is wired into the dome light circuit and has a dead short. The dome light fuse (#12) 15A blows intermediately after inserting a new one and...


This could be a component or a wiring fault. It is easier to check the components so:-

1)Remove lamp and insert new fuse.

If fuse goes again, disconnect stereo, replace lamp and fuse.

If fuse does not blow the dump stereo.

If fuse goes again, trace the wiring and

If it still blows, then the stereo is likely to be faulty

Dec 21, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

Honda Odyssey 2006 DVD player says loading, disk in light on, and


pulled the fuse and left it out for over an hour. The system reset itself when turn back on.

Nov 06, 2009 | 2006 Honda Odyssey

1 Answer

Can not find the right fuse


I don't know if this will be the same as our 2003 Montero, but I saw this when looking for a solution to our problem and thought I would mention it. The fuse for the dome light in our Montero is in the fuse box under the hood, next to the battery. It also had a weird yellow box around that fuse and another. I finally figured out that if you pull up very ******* the yellow box around those two fuses that it will lift partially up and you can get the fuse out (had to use pliers to get a good enough grip to pull it up first time). If yours is the same, you'll understand when you see it.

Nov 15, 2008 | 2000 Mitsubishi Montero Sport

Not finding what you are looking for?
2005 Dodge Caravan Logo

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...