Question about Peugeot 405

1 Answer

Hi i have peugeot 306 d turbo i had a heater matrix problem so i had the dashboard out ! i had the battery disconnected aand now the car is rebuilt it wont start! it has a toad ai606 alarm on it im wondering if it is something to do with the alarm ! could you help me please

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Send me a £10 and i'll tell you how i did it

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get at dashboard lights - removal?


pls.what is .info economic mode on c3

Jan 30, 2014 | 2000 Peugeot 306

1 Answer

Peugeot 306 key is stuck in ignition


if your car are automatic check if he's on park completely

Apr 19, 2012 | Peugeot Cars & Trucks

1 Answer

Overheating problem


i had something similar once, it ended up being the intake radiator hose, it has a metal coil inside, mine was broken and when you revved the motor it would **** the hose shut and overheat, but under 2000 rpm it was fine .

Jan 21, 2012 | 1997 Peugeot 306

1 Answer

Hello, I own a peugeot 306 2.0 litre turbo HDI


it sounds like the catalytic convertor is blocked

Apr 15, 2010 | 2006 Peugeot 604

1 Answer

Hey there 306 d turbo wipers wont work?


fuse will be located under the hood in a fuse box near the firewall....

Sep 09, 2009 | 1990 Peugeot 405

1 Answer

How do i change the heater matrix on a peugeot 405 grd and take out the dashboard


Hi

On paper the procedure for this does indeed involve removing the entire dashboard and it really is a nightmare of a job to do. Having worked on this model before I can however give you this tip.

On the 405 the heater matrix can be disconnected from the engine side as it is connected to the coolant system at the bulkhead. If you then take out the glovebox assembly on the passenger side you will find enough room to work the matrix out towards you.

The only problem is that it is very slightly obstructed by the dash itself when you go to slide it out. If you want to avoid a day and a half of labour all you have to do is take a slight nick - no more than one inch out of the dash which is way down by the passengers feet and really not something you are going to notice a great deal.

The whole heater matrix will then slide out. The matrix can be changed by this method in around an hour. For the sake of an inch of plastic which you are really not going to notice this is the method I would advise.

The alternative is complete removal of the dash assembly for which you will need a service manual and at least a day and a half of your time not to mention the potential problems that occur from removing a dash - upsetting electrics - heater controls etc ........

Hope you find this useful. Please remember to rate my answer. Many Thanks.

Jul 17, 2009 | 1989 Peugeot 405

3 Answers

Speedo, rev counter and fuel gauge not working on peugeot 306


hi i have a garage this problem i encountered myself the other week disconnect the battery for about five minits and then reconnect this solved the problem on this P reg 306 good look if you have not sorted your problem.

Mar 23, 2009 | Peugeot 405 Cars & Trucks

1 Answer

Car problems


how old? could be the body computer and worth trying to reset it, with keys out of car disconnect battery for 3mins then reconnect and wait 30 secs then switch sidelights on then insert key and turn ignition on.

Dec 14, 2008 | 1991 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...