Question about 2007 Chevrolet Avalanche LTZ

2 Answers

HEAD LIGHTS I WANT TO TAKE OFF THE HEADLIGHT THERE ARE TWO SREWS ON TOP BUT THERES SOMTHING IN BOTTOM THAT IS STILL HOLDING IT BUT I CANT SEE WHAT IT IS. THANKS

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

If its a new body style 07 i recommend taking it to the dealer. You will have to remove the bumper skin and some other parts just to change a bulb

Posted on Aug 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey Bunkyk:

Look in you owners manual and you will find clear instructions explaining how to remove the headlights. I used the owners manual which explained how to remove clips that are holding the headlights. I hope this answers your question.
Ray

Posted on Jul 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Parking lights dash lights plate lights not working


Check the fuses first, then if they are ok you may have a defective headlight switch, they connectors can get burned and the switch contacts as well this can cause the loss of lights like you have. Replace the headlight switch and connector as one repair, do not crimp connect the repair connector on, solder and shrink tube the solder joints. To remove the headlight switch for inspection follow these directions.
Remove two bolts under the radio and pull out that bezel

Remove four 9/32 bolts (or screws seen vehicles with bolts, some with phillips screws, some hex screws) on the very bottom of the panel by your knees (two hidden under the hood release handle)

Remove two bolts right behind the top seam of that panel under the steering wheel holding the top panel to the dash (you should be able to pull the steel panel by your knees down slightly to get to them, but you may need to remove or loosen yours, depends on if someone has had it off before)

Remove the three bolts holding the top cover inside the upper lip by the instrument cluster then you can remove the dash panel holding the switch

Sep 14, 2012 | 1997 Ford Explorer AWD

1 Answer

Head lights


Left the bonnet behind the headlight Remove the head light dust boot and the head light connector then there is a spring type clip holding headlight globe unclip it the fit new globe reclip the spring clip and fit the connector and dust boot

Jan 20, 2012 | 2001 Dodge Dakota

1 Answer

How do i replace the front head lights


The headlights are super easy to replace, there should be just a couple 10mm bolts of maybe t20 torque srews at the top of the lights take them out and the headlight should fall out.

Feb 19, 2011 | 2000 Dodge Stratus

1 Answer

How to change headlight


theres phillips head screws all around the top and bottom of light, should be two on top two on bottom
remove those and light comes right out
install new light
re install screws
and viola new light
happy motoring

Nov 02, 2010 | 1986 Lincoln Town Car

2 Answers

How do you change headlight bulb in a 1998 suzuki x90?


Behind the headlight assembly is a large weather boot. Grasp the small portion that the wires come into and pull it straight out to remove the wiring harness. Grasp the large weather boot from the bottom and pull it up. Work your way around the rim and remove it. Yank it off the headlight bulb.

You should then see the headlight bulb and a large wire holding it in place. At the bottom of the assembly is a clasp that holds the wire in place. Work the wire out of the clasp and pull it all the way up.
The headlight should now be free and able to be removed. Remove it and replace it with a new one. Align the three tabs of the bulb accordingly; you'll see two of the slots for these tabs at the bottom, the third is at the top. Make sure that the bulb is inserted completely underneath the wire hold-down. This hold-down is required to keep the bulb from moving around. Ensure that you do not touch the bulb with your bare fingers.

With the bulb inserted, push the wire hold-down down into place and lock it into the clasp. Push the large weather boot back on, taking note of the "TOP" label. Push the center portion of this boot around the back of the headlight bulb.
Reinstall the wiring harness and test the light.

Jan 26, 2010 | 1998 Suzuki X-90

3 Answers

Low beam headlights go out while driving.


check the headlight grounds
also check the daylight running light module

Jan 23, 2010 | 2005 Buick LeSabre

2 Answers

2000 pontiac sunfire how to replace headlight bulb passenger side-samurai01@worldline.ca


two clips hold the headlight in place at the top...remove these and the headlamp will move forward enabling you to replace the halogen bulb (9007 at CTC)

Dec 09, 2009 | 1999 Pontiac Sunfire

1 Answer

Removing the whole pop head lights assembly from my 1997 corvette


Raise the headlights, either with the switch or manually by turning the knob on the headlight motor counter-clockwise.
Unplug the lights NOW to avoid an accidental closing on your fingers,
Remove the 3 philips screws holding the black plastic surrounding the headlights, and slide it forward, there is a small clip on the top that helps hold it to a corresponding clip at the top of the headlight,
Look inside the cavity and you can see the 5 nuts/bolts ( 6 on later years ) that need to be removed,
If you are on the driver's side you can now remove the whole assembly, on the passenger's side you must first unplug the headlight door control module.

Aug 25, 2009 | 1998 Chevrolet Corvette

2 Answers

How to remove grill on 1998 Tahoe. Have to replace headlight assy.


THE TOP SCREWS ARE EASY. THEN THERES THE BOTTOM OF THE GRILL. REMOVE PARKING LIGHTS. THERE ARE 3 PLACES AT THE BOTTOM OF THE GRILL THAT HOLD IT. THERE ARE NO SCREWS OR BOLTS TO REMOVE. JUST 3 PLACES WITH PUSH BRACKETS. LEFT, RIGHT AND CENTER,,A LITTLE TRICKY BUT DONT GIVE UP. LIFT AND PULL THESE TABS/BRACKETS. THE BOTTOM CHROME SHOULD COME OUT A TAB AT A TIME. YOU WILL DO GOOD,,,,RIGHT? YES

Apr 27, 2009 | 2003 Chevrolet Tahoe

1 Answer

How to adjust headlight beams


The plastic cover comes off over the top of the head lights when you have the hood open, the adjustments are there. The screws are small.

Oct 20, 2008 | 1995 Mercury Cougar

Not finding what you are looking for?
2007 Chevrolet Avalanche LTZ Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...