Question about 2000 Ford Focus

1 Answer

Broken Ford Focus 3 door 04 reg Window Regulator. Can I replace myself?

Posted by on

  • fireemt22 Oct 28, 2008

    Same here. How do you replace it?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 345 Answers

If you search Google for Ford Focus Window Regulator replacement, you should find a great deal of information. The front doors are different from the rear (sedan, station wagon) doors. I've replaced the rear window regulator and it wasn't hard but the front window regulator is very different from the rear regulator.

Posted on Nov 07, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix fallen window in car door


Go to You Tube Video & see how to remove the inner door panel,
so you can see the problem

Have to replace a broken window regulator inside the door

Mar 26, 2013 | 2000 Ford Focus

1 Answer

Fallen car window


Sounds like your window regulator is broken. You can find replacements at autozone, orieley, or napa.

Mar 26, 2013 | 2000 Ford Focus

1 Answer

Focus window will not stay up. Can hear motor working.


Remove inner door panel & check out the problem

Most likely a broken window regulator

Oct 21, 2012 | 2003 Ford Focus

1 Answer

Driver side window will not come up. motor is working but window will not come up


the window regulator has probably broken or the gear has stripped inside the motor. pull the door trim off and see if the wire from the regulator is still conected and tight, if its loose then its probably broken and will need replacing, if it looks tight then try and pull the motor off the window reg and check the regulator drive gear. hope this helps. cheers.

Jun 03, 2011 | Nissan Maxima Cars & Trucks

1 Answer

Ford focus rear window cable broken need diagram


You need to replace the regulator as an assembly. No diagram needed. Regulator bolts to door and window, motor bolts to regulator.

Sep 27, 2009 | 2003 Ford Focus

1 Answer

Need to remove rear right side door panel to fix the window


More that likely, the plastic guides that run up and down the "window regulator" are broken. If you take off the door panel, check for broken plastic pieces in the inside of the door shell. It is a common problem. However, the fix is not that easy - or cheap. It requires replacing the entire "regulator" with a new one. The repair requires removing the door panel, taking off the screws that hold the dual rail regulator and cables and unplugging the motor. The new regulator is about $70 from RockAuto.com or you can order from Autozone for around $105-115. I can't find anyone who sells it without the motor which is probably not bad. However, replacing the whole thing is much easier anyway. I'd suggest that you get the new one before you remove the old one. It is a lot easier to see how to take it out if you know what it looks like.

May 12, 2009 | 2000 Ford Focus

1 Answer

Replace a window regulator in a 1994 ford explorer


wow, a lot of work to do.

Window Regulator, Front Door, Explorer Removal
srk~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel and front door trim shield . Refer to Section 01-05B .
  1. Remove inside door belt weatherstrip and glass stabilizer.
  1. Remove front door window glass as described in this section.
  1. Remove two nut and washer assemblies attaching the equalizer bracket.
  1. Remove three rivets (manual) or four rivets (power) attaching the regulator base plate to front door trim panel finish panel (23712) .
  1. Remove window regulator electric drive and front door window channel bracket from vehicle.
  1. Working on a bench, carefully bend tab flat to remove arm slides from front door window channel bracket .
  1. Install new window regulator electric drive arm plastic guides into front door window channel bracket and bend tab back to 90 degrees. Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket . Make sure rubber bumper is installed properly on new front door window channel bracket , if replacement is made.

    4a5a8fb.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Steps 7 and 8 of Window Regulator, Removal.
  1. Install front door trim panel finish panel with preassembled glass bracket into vehicle. Set the regulator base plate to window regulator electric drive using base plate locator tab as a guide.
  1. Install three (manual) or four (power) rivets (385189-S100) to attach regulator to front door trim panel finish panel . Two 1/4-20 x 1-inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (3-5 ft-lb). Equivalent metric retainers may be used.
  1. Install equalizer bracket.
  1. Install inside door belt weatherstrip and glass stabilizer.
  1. Lower regulator arms to access holes in front door trim panel finish panel . Install front door window glass as outlined.
  1. Adjust glass to ensure proper alignment with glass run. Cycle glass for smooth operation.
  1. Install front door trim panel and front door trim shield . Refer to Section 01-05B .

Apr 11, 2009 | 1994 Ford Explorer Limited

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...