At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Temp fix is remove negative cable off battery for a few mins ,then replace,light might come back on but go to autozone have them do a code reader to tell what light means(if the code tells what is wrong)
most likely culprit is the tps itself they go bad if air is good all around then usually the sensor goes most go when fix a flat is used it shorts them out when you go to change tire replace the bad one cost anywhere from $ 5 to $ 25 online
I want to reset the low tire pressure light on my 2003 chevy impala. I go into the stereo disp. button, but the option is not there. How can reset it without using the stereo?
On a Chevy Impala or Monte Carlo with indirect TPMS, a totally different reset procedure is required. You can use the light switch or radio to reset the system. With the light switch procedure, turn the ignition on (engine off), the turn the light switch from OFF to parking lamps three times within five seconds. With the radio technique, turn the ignition on (engine off). With the radio off, hold the DISP button until “SETTINGS” is displayed. Use the SEEK button to scroll down the menu until you see “TIRE MON.” Press the PREV or NEXT buttons until “RESET” is displayed. Then press the DISP button again. You should hear a chime and see “DONE” to indicate the TPMS system has been successfully reset. Use the SEEK button to scroll through the menu until “DONE” is shown, then press DISP once more to exit from the learn mode. Thank you for using fixya and good luck
1 turn the key on
2 press the button on the radio that changes the station for 20 seconds or so
3 the settings display will pop up on the radio display area
reset the tire monitor there
tire pressure reset: turn the ignition to the "on" position. pull the head light switch out until you here the first click then push it back in. pull it out and push it in. and pull it out and push it in giving you a total of 3 times push and pull. this should reset the pressure light if done correctly
the system will monitor all 5 tires. if one is 3-4 pounds differant or 1 of the tires are missing it will come on. doesn't matter what tires you have because the valve stem does the work.
×