Question about 1997 Plymouth Voyager

1 Answer

Need to replace water pump need diagram of engine where located

Posted by on

  • 5 more comments 
  • Bill Sempel
    Bill Sempel Nov 05, 2008

    Need location and diagram of water pump 1996 Plymouth Voyager SE 3.0

  • Bill Sempel
    Bill Sempel Nov 05, 2008

    Need location and diagram to replace water pump 1996 Plymouth Voyager SE 3.0

  • Anonymous Jan 06, 2009

    nned a picture of where the water pump is

  • cgunn7789 Jan 26, 2009

    We are not sure if this is the problem. We need to know where the pump is and need a diagram of how to replace it. We are trying to find the leak. There are no lines that are leaking so we think the water pump may be the problem. Thanks Chris

  • gmoore596 Feb 08, 2009

    i need a diagram of the cooling system to see where the botoom hose on the radiator hooks in to the engine. thank you

  • brucemoden Feb 12, 2009

    grinding sound from engine area, sounds like it may be the water pump, also squeak sound just started sounds like belt slippage

  • theroubideau Apr 28, 2009

    I am not sure if this is the exact same problem but it is leaking and I can't seem to figure out where it is coming from. I need a diagram of where all the hoses and water pump connect to try and figure this all out. Thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need to replace the water pump and need a diagram of where its located in the engine.
thanks!!

Posted on Nov 02, 2008

5 Suggested Answers

  • 121 Answers

SOURCE: need a free online diagram of the engine so i can

go to your local library they normally have mitchell or some type of repair manuals .hope this helps.

Posted on Oct 23, 2009

gypsycat00
  • 224 Answers

SOURCE: need to replace thermostat 2000 taurus

If it's the 3.0L Vulcan Engine (OHV), the thermostat is on the driver's side of the vehicle. Follow the upper radiator hose back to a metal area with three 10mm bolts. This is the thermostat housing. Undo the bolts, and there's the thermostat. Mark the back of it with the old thermostat in it (if you get one with a jiggle valve, it'll make it easier to put the new one in because the jiggle valve needs to be on top). The thermostat and housing aren't perfectly round, so you'll have to play with it a little to get it to line up. Make sure to change the gasket. The spring side of the thermostat goes into the engine.

The water pump is in the serpentine assembly. It's the larger pulley located toward the firewall. It'll be easiest to remove the water pump if you also remove the coolant recovery tank. The water pump pulley has four 1/2" bolts that you need to take out WITH THE BELT STILL ATTACHED. I can't stress this enough. The belt will keep the pulley in place so that you can remove the bolts. Take the pulley off, then the belt. Remove the heater hose at the top and the radiator hose at the bottom. There are 12 bolts of two diameters (1/2" and 10mm if I'm not mistaken). Tap the heater hose lightly with a soft-faced mallet to break the seal with the gasket. Trash the old gasket. Replace gasket (you can also line the mating surface of the water pump with RTV Sealant, put the new gasket on the new pump, and line the other side of gasket with a second coat of RTV sealant if you want a really good seal). Install the water pump and torque to manufacturer's specs. Attach the pulley to the water pump hand tight and put the belt back on. Tighten the pulley bolts. Put the coolant recovery tank back in place. Fill with coolant, start engine, bleed and check for leaks.

To bleed cooling system: Idle the engine until the thermostat opens (you'll be able to tell bacause the upper radiator hose will be uber hot and you'll feel coolant running through this hose). Squeeze all hoses in the system that you can reach, but don't burn yourself. Stop the engine and let it cool. Open the radiator cap and squeeze the COLD upper radiator hose. You'll see some bubbles in your recovery tank. You might have to monitor your coolant level for a couple of days while the final bits of air are purged through your radiator cap (that's why it's pressurized).

Hope this helps. It's not hard, but it took me quite awhile.

Posted on Jun 27, 2009

cda2z
  • 120 Answers

SOURCE: Need to access 96' Dodge neon water pump

the water pump is behind the plastic covers on the right side of engine requires removing the timing belt to replace water pump

Posted on Jul 16, 2010

  • 382 Answers

SOURCE: need to replace water pump in2005 kia sedona

The kia sedona water pump is an internal pump and needs to be replaced with timing belt service. if it is leaking, then you need to change the timing belt as well. probably not something you want to do in the back yard and will run you between 400 and 600 depending on your location and shop.
Visit my Blog

Posted on Jul 21, 2010

  • 3911 Answers

SOURCE: I need the diagram of the location of the water

buy a repair manual for about 5 bucks on ebay. look it up and follow the instructions.

Posted on Dec 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump on 1992 ford tarus


Water pump diagram of the 3.0 V6
7_8_2012_9_05_16_pm.gif

Jul 08, 2012 | 1992 Ford Taurus

1 Answer

I need to know where to put the timing marks facing for alignment on a harmonica balancer


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------

For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

This will help. Thanks.

Feb 14, 2012 | 1997 Nissan Pathfinder

1 Answer

Water pump 1990 oldsmobile 88 royale


For water pump replacement i suggest you to check the help link provided below.click the link below :----Water pump replacing procedure for all vehicles? http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ? http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html
----------Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.

Feb 14, 2012 | 1990 Oldsmobile Eighty Eight

1 Answer

Trailblazer won't start after water pump relacement


Many a times the problem occurs due to timing not adjusted,in many cases the timing belt also needs to be replaced while water pump replacing.
Or its also possible that water pump not replaced properly or timing got mistimed.
I suggest you to check few help links.-----------

For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------



Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks




Jan 26, 2012 | 2004 Chevrolet Blazer

1 Answer

Water pump replacing


For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------



This will help. Thanks.

Jan 26, 2012 | 1996 Isuzu Rodeo

1 Answer

Searching for a diagram of the 2006 Dodge Grand Caravan engine indicating where the water pump is located on the engine.


If it is a 3.0 the water pump is located under the timing belt cover, which is probably why you can't locate it. WARNING If this is the case be very careful. Although the water pump has a "weep hole" because of the pumps location, it is VERY difficult to locate or even notice a water leak. If you have water pump issues, it is very easy to overheat these engines to to the point of serious damage. Please get back to me with your engine size so that I can be more specific. Hope this helps! Dano

Jun 30, 2011 | Dodge Caravan Cars & Trucks

1 Answer

Where is the water pump? I need a print out of the motor.


This is a photo of the water pump on the 2.0L engine.

tecnovative_66.jpg
These are diagrams of the water pump, and where it's located on the 2.5L engine.

tecnovative_113.gif

tecnovative_114.gif

Feb 07, 2011 | 1999 Ford Contour

1 Answer

Need to access 96' Dodge neon water pump to replace it. Need to see engine diagram where water pump is located


the water pump is behind the plastic covers on the right side of engine requires removing the timing belt to replace water pump

Jul 16, 2010 | 1996 Dodge Neon

1 Answer

Need to replace thermostat but cannot locate it. need diagram or description of location.


FOLLOW THE TOP RADIATOR HOSE TO HOUSING.. IT HAS TO BE THERE..
PRIOR TO ENTERING ENGINE ,WATER FROM YOUR RADIATOR IS STOPPED HERE AT THERMOSTAT VALVE , UNTIL DESIRED TEMPERATURE IS REACHED..THEN THERMOSTAT OPENS TO ALLOW WATER INTO ENGINE WATER JACKETS PUMPED WITH ASSIST OF WATER PUMP

NOTE DIRECTION OF THERMOSTAT THERE IS A RIGHT AND WRONG DIRECTION

Jun 13, 2010 | Ford Laser Cars & Trucks

2 Answers

I am having a hard time locating the water pump


the w pump is on the front engine ,hiden behind the timing cover . isit run by the timing belt

Dec 21, 2008 | 1990 Mitsubishi Montero

Not finding what you are looking for?
1997 Plymouth Voyager Logo

Related Topics:

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...