Question about 2006 Hyundai Sonata

2 Answers

WHER IS IAT SENSOR - 2006 Hyundai Sonata

Posted by on

  • bocoto2000 Jul 21, 2008

    ineed were iat sensor hyundai tiburon 99

  • real_azian May 04, 2009

    where can i find the IAT on a tiburon 2006 I4... i already installed after market intake (fujita)

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 26 Answers

The IAT is built into the MAF.

Posted on May 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

HI
WHAT IS THE MODEL YEAR FOR YOUR ASKING ????
TELL US TO HELP YOU !!!
WITH MY BEST WISHES

Posted on Jul 17, 2008

1 Suggested Answer

SOURCE: WHER IS IAT SENSOR

wher is IAT sensor 2003 GMC sierra ext cab 4.8l

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the IAT sensor on the 1993 corvette


Hi Terry:
The IAT sensor is a thermistor which supplies intake air temperature information to the PCM. The IAT is located in or near the air intake duct.

3_1_2012_3_27_41_pm.jpg

Fig. 1: On VIN 8 engines, the MAT (or IAT) is mounted in the intake plenum


3_1_2012_3_28_07_pm.jpg

Fig. 2: On most vehicles, the IAT sensor is threaded into the throttle body extension

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Mar 01, 2012 | Cars & Trucks

1 Answer

Which are the functional iat sensor wires on an accordd 2008


It all depends on which engine your Accord is equipped with. This is really nice-to-know information when you are asking somebody for help with your engine control circuits.

For the 2.4L engine: At the MAF/IAT sensor connector, Pin #4, GREEN/BLACK is the "sensor ground" and Pin #5, RED/YELLOW is the "sensor input" for the IAT.

For the 3.5L engine: At the MAF/IAT sensor connector, Pin #1 GREEN/YELLOW is the "sensor ground" and Pin #2 RED/YELLOW is the "sensor input" for the IAT.

Oct 04, 2011 | 2008 Honda Accord

1 Answer

I have a 03 mitsubishi eclipse 2.4 what colors belong to the IAT sensor


Color wires? The IAT sensor is part of the mass air flow sensor. The wires in the MAF harness that go to the IAT sensor are: Brown is ground, Red/Purple is the 5v reference, and Green/Yellow comes from the IAT into the Atmospheric Pressure Sensor and out to the computer.

Hope this helps. Good luck!

Apr 12, 2011 | 2003 Mitsubishi Eclipse Coupe

1 Answer

Can't find it IAT sensor 2005 dodge diesal 3500


Click the link below.It has location of IAT sensor and the instructions to remove and install iat sensor.------ http://technoanswers.blogspot.com/2011/03/where-is-iat-sensor-located-on-dodge.html ----------------------- This should help.Thanks.Helpmech.

Mar 21, 2011 | Dodge Pickup Cars & Trucks

2 Answers

P0113


P0113 - Intake Air Temperature Circuit High Input

What does that mean?
The powertrain control module (PCM) monitors the temperature of the air entering the engine. The PCM supplies a 5 volt reference voltage to the Intake Air Temperature (IAT) sensor. The IAT is a thermistor that varies resistance based on temperature. As the temperature increases, resistance decreases. Low temperature results in a high signal voltage. When the PCM sees a signal voltage higher than 5 volts, it sets this P0113 check engine light code.

Potential Symptoms
There will likely be no symptoms other than illumination of the Malfunction Indicator Lamp (MIL - Check Engine Light / Service Engine Soon).

Causes
A code P0113 may mean that one or more of the following has happened:
* Internally failed IAT sensor
* Faulty connection at IAT sensor
* Open in IAT ground circuit or signal circuit
* Short to voltage in IAT signal circuit or reference circuit
* IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plug cables, etc.)
* Faulty PCM (less likely but not impossible)

Possible Solutions
First, if you have access to a scan tool, is there an IAT reading? If the IAT reading is logical then the problem is likely intermittent. If the reading is less than -30 degrees, unplug the connector. Install a jumper wire between the harness connector signal and ground circuits. The IAT temperature reading on the scan tool should be maxed out at the high end. For example it should be 280 degrees Farenheit or higher. If it is, the wiring is okay, and it may have been the connection. If it isn't install the jumper wire between the IAT signal circuit and the chassis ground. If now the IAT reading on the scan tool is maxed out then check for an open in the IAT ground circuit. If you get no reading at all on the scan tool, it's likely that the sensor signal is open or the 5 volt reference is missing. Check using a DVOM (digital volt ohm meter) for a 5 volt reference. If it's there, then unplug the connector at the PCM and check for continuity on the IAT signal circuit between the PCM connector and the IAT connector.

Hope this help (remember rated this).

Jun 10, 2010 | 1997 Chevrolet Camaro

1 Answer

Wher is the IAT?


the iat sensor is located in the fresh air duct connected to the air filter in front of the fuse/relay control panel. to remove the iat sensor, renive the air filter cover and using a pair of wire cutters remove the small steel band holding the sensor in place. then by pulling on sensor it will come out. when replaceing sensor be sure to install new metal ring on new sensor to secure it in place.

Apr 28, 2010 | 2005 Dodge SRT-4

1 Answer

CODE P 0113 POSSIBLE IAT SENSOR?


It could be any of the following
Internally failed IAT sensor
Faulty connection at IAT sensor
Open in IAT ground circuit or signal circuit
Short to voltage in IAT signal circuit or reference circuit
IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plug cables, etc.)
Faulty PCM (less likely but not impossible)

Sep 10, 2009 | 2004 Dodge Ram 1500

1 Answer

IAT sensor on 1997 cadillac el dorado


  • P0110 - Intake Air Temperature (IAT) Sensor Circuit
  • P0111 - Intake Air Temperature (IAT) Sensor Performance
  • P0112 - Intake Air Temperature (IAT) Sensor Circuit Low Voltage
  • P0113 - Intake Air Temperature (IAT) Sensor Circuit High Voltage
  • P0114 - Intake Air Temperature Circuit Intermittent ,hope this helps you
  • Jun 14, 2008 | 1997 Cadillac Eldorado

    Not finding what you are looking for?
    2006 Hyundai Sonata Logo

    Related Topics:

    518 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    60769 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6811 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...