Question about 1994 Toyota Pickup

1 Answer

1994 Toyota Pickup 4 cylinder 22 re

My truck will idle erratically when i push on the brake. i recently had the engine worked on due to a coolant leak in the oil. maybe a wire is misplaced. a photo of a 1994 Toyota Pickup EFI equiped four cylinder engine would help out but also some advice

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Throtle postion sensor is going bad located on the front of the intake manifold

Posted on Jul 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93' toyota pickup 4wd 4 cylinders 22re, sputters when given throttle


Low fuel pressure can cause this or a clogged filter, has the fuel pressure been checked? Has the fuel filter ever been changed?

Feb 13, 2013 | 1994 Toyota Pickup

1 Answer

My 1989 22re idle surges when warmed up and brake pedal applied. let off the brake it stops surging


Check the vacuum hose from the engine to the power brake vacuum reservoir, it make be loose or cracked and will cause an erratic idle because of the vacuum leak. Please rate this answer, thanks.

Feb 03, 2011 | 1989 Toyota Pickup SR5

1 Answer

I have a 1994 Toyota pick up 4 cyl 22re engine and it revs up and down once warmed up. So once its warmed up if you step on the brakes it starts to stall or does stall. When I first got it It blew...


code 22 is for a faulty coolant temperature sensor. I suggest you change it. This sensor tells the truck's computer when the engine is fully warm. Without it, the computer is guessing at the fuel mix and it seems to be wandering around. Note: this sensor is different from the one that sends information to your coolant gauge. The gauge sender has only one wire coming out. The engine coolant temp sensor has two wires.

I would also have the brake booster tested for a vacuum leak. The engine stalling when the brake is depressed sounds like it is getting too much air and leaning out. If the brake booster is leaking and won't hold a vacuum, the extra air getting into the fuel mixture could also cause rpm fluctuations like you describe.

Jan 31, 2011 | 1994 Toyota Pickup

1 Answer

1994 toyota pickup v6 overheating


Make sure your cooling fan is working properly. Start it up and let it idle. When the temp goes up on gauge make sure it kicks in. If it does then you should try changing your thermostat. I may be stuck in a closed position or not opening enough to let the right amount of coolant to pass though to cool your engine.

Nov 16, 2010 | 1994 Toyota Pickup

1 Answer

I own a late edition touring 1994 BMW 320i saloon, six cylinder inline engine. problems I have been recently experiencing engine stalling problems, engine tends to work erratically by revving on its own,...


Seems you have a few problems, the irradic idle might be do to a bad idle air control valve/MAF, hard start issue i would need more info to help you better.

Sep 02, 2010 | 1994 BMW 3 Series

1 Answer

How do I properly adjust the idle on my 1994 4 Cylinder 2 wheel drive Toyota Truck? What is the proper way to do this?


http://www.youtube.com/watch?v=aXzDZSNSHJE

If you are having problems with speed fluctuation, etc you need to
find and repair leaks before setting idle.

Feb 19, 2010 | 1994 Toyota Pickup

3 Answers

I have a 1994 toyota truck with a 22re engine, and the problem is a fluctuating idle with the a/c on or off.


I would suggest idling your high idle speed up a quarter turn while air conditioner is on full .

Sep 29, 2009 | 1994 Toyota Pickup

3 Answers

1994 Toyota pickup front brakes don't release


Well I don't think you'll need to buy parts,it sounds like there may be sludge built up between the master cylinder and the proportional valve to the front brakes.Pull the valve off(follow the line off the master cylinder and you'll find the valve)clean it and then flush/bleed the master cylinder before you reinstall,Then flush/bleed the rest of the system.There's a relly good chance that may be all you need to do,but you may need to pull the calipers and clean them also.Comment back if you need more help,Good Luck(To)Yotaguy

Apr 25, 2009 | 1994 Toyota Pickup

2 Answers

89 Toyota pickup erratic idle when warmed up


its a vacumm guys check all your hoses with a carb cleaner while engine on be carefull not to let it catch on fire with the spray ok give it a slight of puff of it with the spray ok!! remember truck hoses are old and cracking ..

Dec 29, 2008 | 1989 Toyota Pickup SR5

Not finding what you are looking for?
1994 Toyota Pickup Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...