Question about 2007 Mazda B2300

1 Answer

I have a 95 mazda b2300 timing belt broke I tried to install new belt went by the book on lining up the marks and it still wont start

Posted by on

  • kingkong70 Dec 01, 2008

    i just ned to know which marks im supose to line up with the arrows?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Is you harmonic balencer back on? If it has timing sencer, it won't fire if it does'nt know when to fire.

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 mazda truck with the 2.3 change timing belt and will not start. All timing marks are inline. Is it possible to be 180 degrees off on the cam?? please help


I am showing a 2.5 engine in a Mazda truck, but its generally the same as a 2.3.
Its not supposed to be an interference engine, so no damage should have occured when the belt broke. Its possible the cam gear is 180 degrees off, but if the marks are lined up by the book it should be correct. Its very possible the marks are a few teeth off since the cam gear can move when the tensioner is released.
Checking compression on all 4 cylinders will tell you if the valves are in the right place.

Feb 21, 2015 | 1999 Mazda B2500

1 Answer

I installed a new battery in my 97 camry le after replacing the timing belt and it wont start


recheck your timing marks and try again something is not lined up right..

Feb 24, 2012 | Toyota Camry Cars & Trucks

1 Answer

What do the timing marks look like and where should they be set on a mazda B2300 2.3 liter when replacing a broken timing belt?


special tools are needed, so any Mazda or Ford dealer can set it up. there are no timing marks. you may have bent valves.

Sep 08, 2011 | 2001 Mazda Tribute

1 Answer

Timing belt broke on a 95 ford ranger.new belt


you have to line up the two marks on the gears and set the tension to the correct setting. then check the marks again. trial and error. i just did my timing belt on my ranger haha

Feb 18, 2010 | 1995 Ford Ranger Supercab

1 Answer

I have a 1996 mazda B2300 SE The timing belt broke I have compression on all cylinders.All the timing marks are in line .When I start the truck it idles rough and has no power.There's no check engine light...


You have still got the timing marks off.Take it back down to the belt,and align it back up,it will be a notch or two off,this will cause this every time.

Nov 26, 2009 | 2007 Mazda B2300

1 Answer

How do you line up the timeing,when changing the timeing belt. 96 mazda b2300


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Mazda B2300 Pickup. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/mazda/model/b2300/1996_mazda_b2300_timing_belt_diagram_marks.htm

Sep 03, 2009 | 1996 Mazda Pickup

1 Answer

The timing belt broke on our 95 elantra and im fixing it how cam


you need to get a diagrm . try googel . timming marks for your car . if the belt broke while driving more then likley there is engine damage

Jun 04, 2009 | 1995 Hyundai Elantra

1 Answer

1996 timing belt changed, lined up all the marks, still won't start, do i place on tdc, remove belt from harmonic balancer,turn crankshaft eone rotation, then put timing belt back on , then try to start?...


Hi my name is juan and lets try to solve this it is possible that when you rotated the camshaft the distributor last his position and this is why it won't start it may not be the problem but this happens a lot so open your distributor and aline up your marks on camshaft and the crankshaft then make sure the distributor is pointing near the #1 spark plug if is opposite give it a 1 more turn to the crankshaft line up your marks again and se what happens #1 spark plug is the closets to the front part of the engine on 4cil

Mar 25, 2009 | 2007 Mazda B2300

1 Answer

Timing belt broke on a 94 b2300 mazda truck. need to know how to put a new one in. how to line it up?


hi,

get yourself a haynes or chilton manual from the auto parts store specific for the truck and study away, sometimes those marks are hard to find but they are there.

good luck

J

Aug 01, 2008 | Mazda B2300 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...