Question about 1992 Toyota Tercel

1 Answer

Timing belt marks

Changing t belt and need to know where the timing marks are

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

Check this out.
http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/05/1e/7b//medium/0900c15280051e7b.gif

Posted on Sep 30, 2008

6 Suggested Answers

Ray190te
  • 61 Answers

SOURCE: timing marks for a daewoo nubira cdx

Here is a pic if the timing marks two small marks on the cam pulleys and one small cut away on the crank pulley .
3d2c66e.png

Posted on Jan 19, 2009

  • 37 Answers

SOURCE: 1991 mazda b2200- timing belt changed

The keyway and or the dot on the crank should be line at 12 oclock. You will see a point on the oil pump housing to go by. On the camshaft the pointer will be at 12 oclock also. Use the O on the camshaft to the top at mark. Be sure to look at the dist. roter to make sure that it is pointing at the #1 spark plug wire. I could get 180 out of time. If you do it right it should start up right away. then you can use a timing light to finish it.
Good Luck jerry1938@hotmail.com

Posted on Dec 13, 2008

johnjohn2
  • 5763 Answers

SOURCE: I am changing the timing belt on my 1989 Ram-50

here are two diagrams to help you do your timing belt, one to line up the timing belt and the other to line up the balance shaft belt, good luck, hope this is what you needed and hope it helps.da22fd0.gifdc33216.gif

Posted on Feb 18, 2010

  • 1757 Answers

SOURCE: timing marks on twin overhead cams 2.4 and crank mark.

Click on the following direct, Free Link. It has several Diagrams including the Timing Belt + Marks for your 2004 Hyundai Sonata 2.4L DOHC In-Line 4-Cylinder Engine (located on the bottom half of the Page on the Link). There are additional Diagrams that will prove to be helpful while you are doing this...

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Apr 16, 2010

Testimonial: "tHANKS, tHIS WILL DO THE JOB."

BCAS1298
  • 3092 Answers

SOURCE: changing the timing belt,wants to know the timing

Hope this helps you.

7152154.gif822d5f9.gif19d115c.gif

Posted on Aug 19, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am changing the oil pump on a ford fiesta TdCI and I need to know the cam belt timing marks or a diagram on the cam belt


Set the crank to 0 degrees according to the timing marks on the damper, look on the cam pulley for a mark and line it up with the mark on the head. Put the belt on WITHOUT moving the cam or the crank.

Jan 27, 2017 | Ford Cars & Trucks

1 Answer

Replace timing belt on 94 dodge stealth 3.0 dohc need to know everything to replace timing marks and route of belt


timing marks are easy to see,(on the top of gears and line up with the metal indents above them) change the water pump it idles on it... you need a cam holder to hold your cam gears in place when changing they will spin when you take off the old belt... it is an easy timing belt for a *** V6...!

Apr 06, 2010 | 1994 Dodge Stealth

1 Answer

I am changing the timing belt on my 1989 Ram-50 and need to know how to line it up. the motor is a 2.0 litre and uses 2 belts. What are the marks and where are they?


here are two diagrams to help you do your timing belt, one to line up the timing belt and the other to line up the balance shaft belt, good luck, hope this is what you needed and hope it helps.da22fd0.gifdc33216.gif

Feb 18, 2010 | 1989 Dodge Ram 50

1 Answer

Changing timing belt


Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2000/make/hyundai/model/accent/2000_hyundai_accent_timing_belt_diagram_marks.htm

Feb 09, 2010 | Hyundai Motor 2004 Accent

1 Answer

Timing mark location alignment when changing timing belt.


Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/kia/model/optima/2002_kia_optima_timing_belt_diagram_marks.htm

Feb 01, 2010 | 2002 Kia Optima

1 Answer

How do i install the cams on a 92 toyota paseo. 1.5l I am changing the head gasket and had to take off the cams now i am putting it all back together. **** need to know how to alingine the cams up...


First of all, bring your number one piston to top. Number one is the first one from the right (passenger side). There is a mark for this on the front of the belt cover. The timing mark on the crankshaft pulley should be aligned with 0. There will be two horizontal pit marks on one camshaft sprocket and one (a little bigger) on the other camshaft sprocket. These should fit together. Now the timing mark on the face of the timing belt sprocket should be a couple of degrees to the right of straight up. There will be a 5E on the timing belt sprocket. This 5E is what needs to be just to the right of straight up. Tighten everything down and your engine should start.

Jan 30, 2010 | 1992 Toyota Paseo

1 Answer

You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1994 Toyota Corolla. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/toyota/model/corolla/1994_toyota_corolla_timing_belt_diagram_marks.htm

Sep 04, 2009 | 1994 Toyota Corolla

1 Answer

I am changing the timing belt and need to know where the timing m


Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/toyota/model/camry/2001_toyota_camry_timing_belt_diagram_marks.htm

May 10, 2009 | 2001 Toyota Camry

1 Answer

Changing 3.0L timing belt


Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/chrysler/model/sebring/2004_chrysler_sebring_timing_belt_diagram_marks.htm

Apr 19, 2009 | 2004 Chrysler Sebring

1 Answer

Where are the valve timing marks on a 1997 993cc charade


Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.

To answer your direct question: (See Diagram 96F14675 on the Link) The Belt Alignment and Align Mating Marks are the keys.
The Crankshaft "pulley" (actually the Sprocket) has the outer Flange (cover) which needs to be removed to see the Timing Mark.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1988/make/daihatsu/model/charade/1988_daihatsu_charade_timing_belt_diagram_marks.htm

Mar 13, 2009 | 1988 Daihatsu Charade

Not finding what you are looking for?
1992 Toyota Tercel Logo

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

71856 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7036 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...