Question about 1999 Chevrolet Tahoe

3 Answers

Brake lights not working

Brakes work fine, brake lights left and right not coming on.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Pretty common issue with the Tahoe/Yukon is the bulb holder...mine both went out at the same time as well...you can buy the bulb holder at any parts store, most have these on hand. They hold all 3 bulbs (lights, brakes/turn signal) and are a simple replace...most likely will fix your problem!

Posted on Oct 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Get your pedal switch replaced

Posted on Aug 23, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

Try the fuse, if thats not it then check the wire harness...

Posted on Aug 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced main brake line on driver side on 2000 1500 Dodge Ram pick up blead all brakes at each caliper no air present. Driven around six hour but abs and brake light still on.


If there is an ABS issue it will turn on the red brake light as well. Were these lights on before the repair? You can try disconnecting the battery to see if the ABS resets. If the lights come back on you will have to have a scan test performed on the ABS system to isolate the problem

May 10, 2015 | Dodge Ram 1500 Cars & Trucks

1 Answer

94 prizm The brake idiot light goes on and off


The warning light is connected to the master cylinder and the parking brake.
It comes on if the brake fluid is low or if the parking brake is left on.

Apr 10, 2013 | Geo Prizm Cars & Trucks

1 Answer

Jaguar xj6 break light cancels signal


Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.

May 23, 2010 | 1989 Jaguar Vanden Plas

1 Answer

2005 Nissan Frontier...when I step on the brakes my right turn signal comes on but doesn't blink? when I turn on the Left turn signal and step on the brakes, it blinks just fine! What's causing this?????


If the turn signal bulbs are the same as the turn signal bulbs it would indicate the brake light on the left is not working. If the brake lights AND the right turn signal come on it could indicate a wire is getting a cross feed from an improper source. If you are comfortable with electrical systems - If you have a tow package you may want to check the wires to the trailer. Otherwise have it checked by an electrical shop.

Jan 30, 2010 | 1998 Nissan Frontier

1 Answer

Brake lights go off when i press the brakes at night


sounds like a bad ground strap in rear. look for signs of rust and scrape clean. even the sockets could have rust

Dec 01, 2009 | 1999 Jeep Grand Cherokee

1 Answer

2005 Toyota Sienna rear brake light problem. The rear center brake light works. The rear left and right brake lights do not. Fuses are fine. Checked bulbs and they look fine and have continuity. If not...


have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used
otherwise-
Check continuity of live from center to lh & rh lights and/or is there a live at those lights

May 03, 2009 | 2004 Toyota Sienna

3 Answers

2000 gmc jimmy brake lights


I had the same problem with my 2001. I found it was the multi function switch. Better known as your turn signal switch. I found that the hazard switch portion of it had shorted. replacement is fairly easy, aftermarket part is available, much cheaper than GM.

Jul 15, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
1999 Chevrolet Tahoe Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...