Question about Jeep Cherokee

1 Answer

I HAVE A 1990 JEEP CHEEROKKE THAT WONT START IT IS NOT GETTING SPARK THE COIL HAS BEEN CHANGED

Posted by on

  • melabriola Jul 27, 2008

    I have a 97 cherokee that won't start,checked all fuses and relays.no spark or fuel pump working.ignition switch ok.no volts read on dash voltmeter and the gas gage doesn't read either.how do you check computer before you go out and buy one?

  • Anonymous Jan 23, 2009

    not getting spark to the plugs changed the coil and module

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 126 Answers

Try to look at the crankshaft sensor? also take a look at the ignition module inside the distributer. ok

Posted on Jul 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 Jeep YJ with no spark


try a new coil.some times a new coil will fail

Jul 29, 2012 | 1990 Jeep Wrangler

1 Answer

Car wont start


turn over take spark plug out n smell it to see if your getting fuel

Apr 10, 2012 | 1990 Oldsmobile Cutlass Ciera

1 Answer

My 1990 hond accord will turn over but wont start can you please help


MAKE SURE SPARK PLUGS AND WIRES IN GOOD CONDITION, REPLACE DISTRIBUTOR CAP AND ROTOR,CHECK FOR SPARK AT SPARK PLUGS,IF YOU DONT SEE SPARK CHECK TO SEE IF POWER GOING TO COIL IF NOT CHECK IGNITION FUSE.IF FUSE OKAY AND POWER GOING TO IGNITION COIL,COIL FAULTY OR IGNITER UNIT FAULTY. CHECK FOR FUEL PRESSURE MAKE SURE FUEL FILTER BEEN CHANGED.FUEL PRESSURE SHOULD BE 40 PSI. IF YOU GETTING SPARK AND FUEL. YOUR IGNITION TIMING OFF OR VALVE TIMING OFF DUE TO A WORN TIMING BELT.

Nov 01, 2011 | 1990 Honda Accord

1 Answer

Changed spark plugs, changed ignition coil. still not getting any spark and car wont start


Please change the rotor and cap before you go any further. The rotor tip can be worn which can prevent charge from getting to the plug wire. The contacts inside the cap could also be corroded.

Apr 22, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Cranks but wont start


You need to check and see if the plugs are getting voltage/spark. If they are not then check and see that the coil is getting voltage. It sounds like you possibly have a bad coil. Something is causing your plugs to not fire.

Jun 09, 2009 | 1990 Jeep Cherokee Limited

3 Answers

1990 Jeep YJ 6 cyc. Won't Start---No Spark From Coil


It would be great if you could find the Ignition Control Module!!! From my experience on my Jeep...90 YJ 4.2 liter carb. it does not have one...Computer controlled only...

May 17, 2009 | 1990 Jeep Wrangler

1 Answer

Motor won't start


You need 3 things for a start condition 1 spark 2 fuel 3 compression. If you have lost spark and have changed wires and coil then you should look at the crankshaft position sensor. This sensor tells the computer when to fire the coil and which plug to fire. Hope this helps. I will check back on the 14th.

May 14, 2009 | 1990 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...