Question about Chevrolet Malibu

1 Answer

Blower works only in position 4 and 5. - Malibu Chevrolet Cars & Trucks

Posted by on

  • mickeyphil Feb 12, 2009

    my heater only works on level 5 which means it blows very strong and never really quite heated enough.

  • Anonymous Feb 16, 2009

    I have a 2002 Chev Malibu, and the heater stopped working randomly one day. It works on level 5 only. When I turn it on, my car seems to over work itself- and the lights (interior/exterior) seem to flicker.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,039 Answers

Heater resistor blown change it under dash passager side sure its thant hope it fixye our post thanks pierre

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Blower motor not working on 4 1998 Mazda protege


check for power and ground at the blower motor. if this is good then hit motor. if it starts the motor needs replacing. then check the fuse then the fan speed switch for power and ground going to the switch and coming out of switch.

Jul 28, 2015 | 1998 Mazda Protege

3 Answers

Why wont blower motor on 2004 kia sedona work in position 3


Either you have a faulty switch or the blower motor resistor is burned out and it is located near your blower in the plenum. Blower Motor Resistor at AutoZone com Best Blower Motor Resistor Parts for...

Jun 21, 2015 | 2004 Kia Sedona

1 Answer

My blower only works 1 through 4 and will not work on the highest position number 5


{: ) Check out the J-case fuse (square) labeled BLWR 40amps at the underhood fuseblock. This fuse is the source of power to the blower motor when position 5(max speed) is selected. If this fuse is tested to be okay, you need to access for the blower resistor connectors. Turn ignition on, and set blower to max speed (#5). Probe on the blower resistor terminal (orange wire) and you should get 12volts, also probe the terminal (red wire) which came from the 40amp fuse. 12v should be present on these two terminals at the blower resistor when at max blower speed. Particularly on the orange wire, if you don't get 12volts when at #5 position, it 's probable that the blower speed control switch is faulty. But if you did got 12volts during the procedure, then you should replace the blower motor resistor. Goodluck.

Jul 24, 2011 | 2006 GMC Envoy

1 Answer

Honda Accord 2002 heater blower control works only in the high position. The 1, 2, and 3 positions do not work but the high (4) does.


The heater blower is normally controlled by voltage sent to the blower via a resistor network.
In this case it seems that this unit also called the fan resistor is defective.
I assume that 4 is the position where the blower is running HIGH and in this position the blower is powered directly without using resistor for lowering the speed of the blower. In step 1 - 3 the blower is powered via the mentioned resistor network.

In my opinion the resistor network is defective.
Replace it !!!!.

Jan 31, 2011 | 2002 Honda Accord

1 Answer

Hi there, I have a problem with the Blower motor. 4 years ago it wouldnt work on 1, and now not on two either. 3 and 4 still work (but for how long). That one doesn't work seems to be a very common issue...


it needs a blower moter resister beleive honda calls it a blower motor module.it basically routes the current through the desired resistance for the setting.the lower the setting the more resistance in the circuit the higher the setting the less resistance in the circuit .ive changed many many of them for people you need it .......blower motor module

Oct 30, 2010 | 1990 Honda Civic

1 Answer

2001 Galant manual air conditioning. In position 1 and 2 ac works blower does not work in position 3 and 4 blower works ac does not work.


common problem take it to a air con place and get a quote , they have pneumatic switches and air lines, very technical

Jul 01, 2010 | 2001 Mitsubishi Galant

1 Answer

The blower doesn't work at any of the 4 speed


what voltage reading do you get at the motor in respect to a known earth? Im thinking you have lost the motor earth.

Oct 28, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

A/C blower not working on high


check for voltage at high-speed blower relay with ingnition switch in run positionin run position and switch in Hi position . if voltage is not present, check for voltage at blower switch. (note*) relay is under hood about the middle of pass side wiper.

Jun 27, 2009 | 1996 Chevrolet Blazer

2 Answers

Blower is working on position 4 (max) only


The fan speed control resistor is burned out.

Nov 23, 2008 | 2000 Nissan Quest

3 Answers

1998 chevy blazer


fan blower resistor. Under hood near blower motor. Follow the power that goes to blower back to resistor, there should be several wires on it. That's the most LIKELY source of your problems.

Aug 06, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...