At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Ilost my keys, and had to have my car so i broke the ingnition houseing...to try and crank it...but when i try turning it over it is telling me something about the anti teft system and i should remove the key..how do i reset this so i can crank the car!!!!
Re: Ilost my keys, and had to have my car so i broke the...
You def messed up it needs the ignition key to bypass the theft system. without it you cant start it. replace the housing install a new ignition key and tumbler and have reprogramed to solve this problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,some times you have to have the key in the ignition barrel and switched on the first setting,
what I would try to do is put barrel in with key in as you push it in its housing turn key while still pushing the barrel in to its first setting entry as you push the barrel in to move the key from left to right and see if it will slide into its housing.
please let me know how you got on,or maybe youve already tried it.best of luck.
Could be a bad switch. Use a ohm meter to check each switch position. Use fuel pressure gauge to test for correct pressure. Use noid light to check for injector pulse. Check for ingnition spark.
Your flywheel may have broke or the crank could have broke. If the crank broke the engine is done. Try to turn the engine over by hand. You can put a socket on the crank pully bolt and try to turn it.make sure the key is off and out of the ignition. Sorry for your loss.
make sure that it is in park or neutral wiggle a bit as you try to start, may not have enough powr to crank.. tap the starter with something as someone tries to start may have a weak starter.. check batt term for issues of corrosion. check alt belt tension...
Get new key cut at dealer then insert into ign, Use object to tap strait in several times then jiggle key and rock steering wheel at same time.if this does not work will rquire new cylinder and housing.
Push in the key, while turning at the same time. If it still does not turn freely. Try wiggling the wheel a little bit. Do not put too much force, the key may break inside the switch. If that does not work, make sure the car or truck is level . Preassure on the wheels places preassure on the sterring wheel also.Then try again.
×