Question about 1999 Chevrolet Tahoe

2 Answers

How do I remove the fan clutch for a water pump replacement? 1999 Tahoe 5.7

Posted by on

  • eddanval Feb 01, 2009

    how to remove clutch fan for 1996 chevy

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I find that if you take the old serpintine belt and a wood shim and stick them between the pullys it will give you enough torque to unscrew the fan clutch

Posted on Mar 24, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

A 10mm wrench. The bolts are threaded backwards to keep it from comming loose during operation.

Posted on Mar 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95' ford econline 350 van replacing waterpump and clutch fan how to replace.


TO REPLACE WATER PUMP.REMOVE THE RADIATOR SHROUD HALVES.REMOVE FAN CLUTCH AND FAN.YOU NEED FAN CLUTCH WRENCH AND A FAN CLUTCH PULLEY HOLDER.YOU CAN RENT TOOLS AT AUTO ZONE OR BUY THEM AT A AUTO PARTS STORE.THE FAN CLUTCH BOLTS ARE LEFT HAND THREAD. REMOVE THEM BY TURNING CLOCKWISE.BEFORE INSTALLING NEW WATER PUMP COAT BOTH SIDES OF WATER PUMP GASKET WITH GASKET SEALER.TORQUE WATER PUMP BOLTS 18 FT LBS.

Mar 15, 2011 | 1995 Ford Econoline

1 Answer

Replacing water pump on 5.2L 99 dodge dakota water pump pully is broke so i cant take off the shaft that holds the fan and fan clutch im just looking for sugestions


somehow you need to grab a part of the pulley to prevent it from turning.i dont know if you were aware that the fan and clutch do not unbolt byt unscrew like a nut the directin to remove is on the fan shroud. if you cant get the fan off take the pump off with the fan on it, it can be done just you will have to remove shroud with it.then wrestle with it on the bench

Mar 08, 2010 | 1999 Dodge Dakota

1 Answer

1999 Suburban with vortech engine 5.7. Removing the water pump.


buy a loaner tool from any auto parts store for fan clucth romeving.

Oct 12, 2009 | 1999 Chevrolet Suburban

1 Answer

I am trying to replace water pump and need to remove the clutch fan first. How do I do this? It is a manual V6 1999 Dodge Dakota truck.


Before removing the belt turn the nut counter clockwise. You may have hit the wrench with a hammer to loosen it. Because of limited space, the fan and shroud have to be removed at the same time. Do not lay the fan clutch in a horizontal position, stand it up.

Sep 06, 2009 | 1999 Dodge Dakota

1 Answer

I need directions to change my water pump


drain engine coolant.relieve belt tension .and remove the drive belt.remove upper fan shroud.remove fan or fan and clutch assembly.remove water pump pulley and coolant hoses from water pump.remove water pump bolts.then remove pump from engine.pay attention to bolts location because they are different lenghts.clean water pump gasket mounting surface dont scratch .or pump gasket wont seal and leak .apply sealant to water pump bolts.install water pump with new gasket.if gasket paper put a sealant on it.torque water pump bolts to 30 ft lbs.if you got a 2.2L engine torque water pump bolts to 18 ft lbs.install coolant hoses on pump .install water pump pulley.install fan and fan clutch assembly.install the drive belt .and the upper fan shroud.fill the radiator with coolant.then run engine to check for leaks.WARNING AS A SAFETY PRECAUTION REMOVE NEGATIVE BATTERY CABLE SO CAR WONT BE CRANK BY ACCIDENT. ALSOOOO DONT FORGET TO TURN OFF RADIO FIRST BEFORE DISCONNECTING BATTERY SO YOU WONT LOSE YOUR RADIO CODE.

Jun 01, 2009 | 1999 GMC Jimmy

1 Answer

How do you remove the fan from the water pump on a 1999 silverado


i have a 97 chevy tahoe and i did the water pump , boy was that a big mistake . well i did it but i needed help . you need to nock the bolt loose with a hamer , the dealer use a speacal tool just forthis becoues its crazy but it takes some force . a larg wrench and a cupole of good wacks will getr done , so if this is to vage but you can always call your local dealer and ask to speak to a service tech

Apr 01, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Need to take off fan clutch, have taken off parts in the way


4.9L SFI
SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Fan Clutch Holding Tool T84T-6312-C Fan Clutch Nut Wrench T93T-6312-B
Removal
  1. stj~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: The large clutch assembly nut has a right-hand thread and must be rotated counterclockwise to remove it.
    Remove the fan clutch (8A616) from the water pump (8501) by turning the large nut, which is part of the fan clutch, using Fan Clutch Holding Tool T84T-6312-C and Fan Clutch Nut Wrench T93T-6312-B.
  1. Remove two screws retaining fan shroud.
  1. Remove the fan blade (8600), fan clutch and shroud.
  1. If the fan blade and fan clutch have to be separated, remove the remaining bolts attaching the fan blade to the fan clutch
b098d2e.gif


5.0L, 5.8L and 7.5L Engines
Removal
  1. Remove screws retaining fan shroud (8146) to radiator (8005).
  1. Remove four screws retaining clutch on water pump hub.
  1. Pull fan clutch and fan blade off water pump pilot and remove fan clutch, fan blade and shroud from vehicle.
  1. Remove four screws and separate fan clutch from fan blade.
4d17f8c.gif

Item Part Number Description 1 8509 Water Pump Pulley 2 57632-S Screw and Washer Assembly, 5/16-18 x .62 Hex 3 8600 Fan Blade (5.0 and 5.8L) 4 8600 Fan Blade (7.5L) 5 8A616 Fan Clutch 6 380288-S2 Screw and Washer Assembly, 5/16-24 x .88 Hex A — 16-24 Nm (12-18 Lb-Ft)

Mar 10, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

How to change a water pump?


You will need to remove the upper fan shroud, remove the fan clutch that is threaded onto the water pump it is easiest to get the tool for this or you can use a bar between two of the pulley bolts and use a cresent wrench on the big nut. After you remove the fan clutch there is the small hoses on the top of the water pump and the lower hose on the bottom of pump. Then there are only four bolts holding the pump to the motor. Reinstall in reverse order. Let me know if you need more help.

Jan 06, 2009 | 1999 Chevrolet Blazer

1 Answer

Water pump replacement


Get a wrench that fits on the fan clutch. Most auto part stores will have a fan clutch removal tool.

It works the best if you put the wrench onto the fan clutch and then hit it with a hammer in the dirction to take the clutch off. Sometimes it might take multiple tries to break the clutch loose.

Aug 05, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
1999 Chevrolet Tahoe Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...