Question about Chrysler Concorde

1 Answer

Trouble codes P0420 P1681 P0344 P0340 P0420 - Concorde Chrysler Cars & Trucks

Posted by on

  • 4 more comments 
  • undercs2000 Sep 20, 2008

    I have a 2003 PT Cruiser which showed code P0340 initially. Before the code appeared, the car shuddered violently when accelerated quickly. I was told the code related to the camshaft position sensor. So, I had the part replaced. It worked great for about 2 weeks then did it again on fast acceleration. New codes appeared P0344 & P0522. I took it in and they could not diagnose it. I moved it to a dealer and they came back saying "it seems to be an intermittant problem, but they feel it could be the wiring harness to the PCM" Of course, the estimate was $1,200. I was wondering does this sound right and can a do-it-yourselfer do anything to detect this or repair it?

  • Anonymous Dec 06, 2008

    have the same problem , had onboard computer repaired. issue reappeared

  • tltlft Dec 30, 2008

    my car got the same reading P0340 it does not want to start, and shifts very bad when i go to accelerate , or even take off from a stopping point. I have replaced just about everything on this car from input /output controll sensors to the main brake thing up in the top of the engine drivers side, not sure of the name there, but i have had nothing but trouble with this engine since I got the car

  • Anonymous Mar 25, 2009

    my car is a 2003 pt cruiser gt my check engen light comes on and my car will not rev over 2600 rpms illl turn it off then back on and it will be fine but the head gasket blow along with other probs payed to get them all fix but now it happens more often and my car has trouble restarting when i try and start so it can rev over 2600 and i got code p0340 and p0344 help

  • dennismash Apr 02, 2009

    I had a similar problem, the engine started revving high while in park. Then the check engine light came on, code p0344. I replaced the camshaft position sensor and the problem was gone... for about three hours. Now it won't start at all, i have power to everything, lights, horn, windows, etc. but the car will not turn over at all.

  • Anonymous Mar 15, 2014

    engine bogging

×

Ad

1 Answer

No I/P Cluster CCD/J1850 Message No CCD/J1850 messages received from the cluster
Received control module

Posted on Sep 18, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 chyrsler 300m it went in limp mode codes p0700. P0340 p0344 p0430 p0888 came up cleared the codes and now it knocks.


clearing codes wont correct the problem and limp mode is designed to protect motor and transmission - p0700 is a transmission problem
P0700 Transmission Control System Malfunction p0340 is camshaft position sensor malfunction
https://www.obd-codes.com/p0340 p0344 is also a camshaft position sensor circuit problem
P0344 Camshaft Position Sensor Circuit Intermittent your p430 is a cat converter problem
https://www.obd-codes.com/p0430 and p0888 is transmission relay problem these reasons are limp mode the knock can be fuel not burning correctly or a lower engine knock can mean you damaged a piston

Nov 08, 2016 | Cars & Trucks

1 Answer

P0340 code and p0344 on 3.7 dodge Dakota


First check the easy thing. Have your battery tested. Sensors very sensitive to failing battery. If the battery tests fine then you will need to change the Cam sensor probably a $30 part. On your truck remove the air filter housing & the cam sensor should be easily accessible at the front of the cyl head. Hope this works for you. Based on your P codes it should.

Mar 25, 2014 | 2004 Dodge Dakota

1 Answer

Neon Code P0344


I believe that the splice for the cam sensor is about 8 inches back in the harness. Power to the cam supplies several sensors. I have fixed a few that the splice was bad, There is very little room to work in to get to the splice, but it's not impossible to fix.

Jul 13, 2013 | 2004 Dodge Neon

1 Answer

P0016 what is that n how u fix it


P0016 Crankshaft Position - Camshaft Position Correlation
P0135 O2 Sensor Heater Circuit
P0138 O2 Sensor Circuit High Voltage
P0340 Camshaft Position Sensor "A" Circuit
P0344 Camshaft Position Sensor "A" Circuit Intermittent
P0508 Idle Air Control System Circuit Low
P0522 Engine Oil Pressure Sensor/Switch Low Voltage
_____________--
JMA TRS-5000 Cloning Machine

Jun 03, 2013 | Cars & Trucks

1 Answer

Mustang error codes P0340 , P0344


These are camshaft position sensor codes. Replace camshaft sensor.

Apr 18, 2017 | 2006 Ford Mustang GT

1 Answer

I have a 2004 Dodge Intrepid that pulled codes P0420, P0344 & P0340. I changed the plugs & coils AND the Cam sensor. Added fuel injector cleaner to the tank on fill up, now the engine sputtered on...


Have the catalytic converters replaced . An quit trying to play automotive mechanic , leave that to a qualified , ASE certified technician !

Apr 11, 2017 | 2004 Dodge Intrepid

1 Answer

3 codes present on my 2002 Envoy. p0172, p0420, and p0340,


Track the p0340 first camshaft timing is very important and could possibly cayse your other codes,Call your local GMC dealer I think I remember a bulletin about this code.

Aug 21, 2009 | 2004 GMC Envoy

1 Answer

Trouble codes


Trouble Code: P0139
O2 (B1 S2) Slow Response
Trouble Code Conditions:Engine started; vehicle driven at 20-55 mph with the throttle open for 2 minutes; ECT at more than 158ºF (70C); catalytic converter temperature is more than 1112F (600C); and EVAP purge is active. O2 Sensor signal voltage switches less than 16 times from lean to rich within 20 seconds during monitoring, or will compare the state of change between the front and rear O2 Sensors and if the differences are greater than a calibrated amount, the DTC will set. 3 good trips are required to turn off the MIL.
Possible Causes:
  • Exhaust leak
  • O2 element is contaminated, deteriorated or it has failed
  • O2 signal circuit or return circuit has failed

Trouble Code: P0344
Camshaft Position Sensor Circuit Intermittent
Trouble Code Conditions:Engine cranking or running; system voltage over 10.5v. The PCM detected an intermittent loss of the CMP Sensor signal during the period of 2.5 complete engine revolutions. The failure counter must reach 20 before this code matures and a code is set.
Possible Causes:
  • Wiring harness fault
  • 5v supply circuit open or shorted to ground
  • Tone wheel/pulse ring is damaged or corroded
  • CMP Sensor has failed
  • CMP Sensor signal circuit is open, shorted to ground or battery voltage or 5v supply
  • CMP Sensor ground circuit is open
  • PCM has failed
  • Trouble Code: P0340
    No Camshaft Position Sensor Circuit Failure
    Trouble Code Conditions:Engine cranking or running, system voltage over 10v. The PCM detected CKP pulses without detecting any CMP Sensor pulses for 5 seconds or 2.5 engine revolutions.
    Possible Causes:
  • CMP Sensor connector is damaged, open or it is shorted
  • CMP Sensor signal circuit is open or shorted to ground or to battery voltage or 5v supply circuit
  • CMP Sensor 5v supply circuit is open or shorted to ground or to battery voltage
  • CMP Sensor ground circuit is open
  • CMP Sensor is damaged or has failed
  • CKP Sensor is damaged or has failed
  • PCM has failed
Good luck....

Nov 05, 2008 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

4,979 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...