Question about 2000 Chevrolet Venture

1 Answer

Signal lights fail to work. keeps blowing fuses.

I have a 200 chev venture. lately, espesially after it rains, my signal lights fail to work or only my 4 ways come on. I have checked and replaced fuses.i had to replace the T/SIG fuse from a 10 to a 15 amp fuse. that seamed to have fixed that problem. Now I had to remove the fuse for the ELC/TRAILER or my parking lights would stay on. I have checked the wiring harness for shorts and for any possible way water may get into the conection joints. I have not found any as of yet!
I have wired a trailer light harness directly to my rear lights. it does have a 5 into 4 relay on it.
I have always had problems with this harness, many trailers i have towed the lights dont seam to want to work as they should! I have had it to my mechanic and every time its there they work, unfortunatly when they dont i have taken it over and by the time i get there they are working again.
A frined of mine had a 2001 but his had a plug in conection for a wiring harness built in behind the air commpresser unit in the rear side wall.mine does not have that!
I hope you are able to decifer the problem/s I am having with the electrical system and are able to help me out to fix the prblem/s
Thank You in Advance
Glenn

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Hi, the best way to solve this problem is installing a conector that comes allready made for your ventue ,it conects under the rear of your van an , you can buy it at auto zone ,checkers pep boys ,wallmart sells some of them too ,it goes at the original conections ,(no cutting or splicing)...I hope this help.....

Posted on Aug 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blowing transmission fuse on a 1996 chev 1500


Pinched wire between engine and trans due to mechanic fault during installation.

Dec 27, 2013 | 1996 Chevrolet K1500

1 Answer

Fuse keeps blowing out


The parking lights, dash lights, turn signals, and hazard flasher should be 4 different circuits.
So you would need to know exactly what that fuse protects, then look for the short to ground.

Feb 27, 2013 | 1999 Dodge Durango

1 Answer

Where is rear brake light fuse 2004 chev venture


because no one else did I will tell you where that very elusive second fuse box is hiding open the passenger door and it is directly to the right of the glove box hope this helps

Apr 09, 2012 | 2004 Chevrolet Venture Passanger

1 Answer

I have a 1997 chev blazer why does it keep blowing gauge fuse? what could it be?


How would we know that?
If a fuse blows, you don't replace it.You diagnose why it failed.

Oct 12, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

Traction systen warning message.The right turn signal also blinks rapidly if turned on,both dashboard grenn turn signal lights also intermittently come together venture 2001.


traction system warning message.The right turn signal also blinks rapidly if turned on,both dashboard turn signal lights also on come together venture 2001.This happens when it is cold raining and the automatic head lights are on and the brake pedal is depressed.

Oct 09, 2009 | 2001 Chevrolet Venture

1 Answer

2002 Dodge Neon 20 amp FP/ASD fuse #21 keeps blowing


It appears that it is part of the fuel pump circuit, so I would concentrate on wiring harness & connector at fuel pump, clean it real good, and apply dielectric grease to the connection, as well as the fuel pump relay, connector & harness.

Jan 20, 2009 | 2000 Chevrolet Venture

1 Answer

4x4 fuse on 1991 chev 1/2 ton keeps blowing..Why?


You might have a short in your wiring some where from the actuator back to where the wires go through the cab .could have been rubbing on something to cause this . just a thought

Jan 13, 2009 | 1991 Chevrolet C/K 2500

1 Answer

Turn signal not blinking


Yes, u can repair this, Check the flasher, it controls the turn signals and probably needs to be replaced. Usually mounted on the fuse block. Let me know how u make out.

Nov 12, 2008 | 2001 Oldsmobile Bravada

Not finding what you are looking for?
2000 Chevrolet Venture Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...