Question about Chevrolet Silverado 1500
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You're going to have to bleed the system alot on those trucks. Just remove the return line and have an assistant turn the steering wheel back and forth just enough to engage the pump and filling the resevour while doing this. Keep bleeding until you have a good flow of P/S fluid out with no air bubbles. This can take a while.
Posted on Aug 24, 2008
the best thing that u can do is go to the store and buy the repair manual for your car they usually run between $15 and $20 and they will have step by step instructions and pics....not only is it good for this but pretty much anything else u want to know about ur car..hope this helped
Posted on May 22, 2009
you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to pull off the seal in order to see inside the door. The motor and regulator will be held in by a few bolts that may be tricky to get to.... This is probably going to be up to 3 hours if you're unsure of what to do...
Posted on Aug 19, 2009
Not a whole lot different. Just need to keep removing plastic down at the heater until you get to the heater core. Then disconnect it on the firewall side.
Posted on Dec 22, 2009
under hood drivers side on fire wall between engine and brake master cylinder take off wiper arms slide tab at bottom lift off -- un- screw cowl the cowl is in 3 parts -unscrew center with hood closed first the screws are recessed about an 1-1/2 below the top of cowl open hood and unscrew the both sides of cowl and remove than remove center watch the washer hoses now will have access to the wiper transmission mark where transmission is before unbolting motor and transmission remove motor install is in reverse
Posted on Feb 10, 2010
Tips for a great answer:
Oct 04, 2012 | 1999 Chevrolet Silverado 1500
Aug 27, 2017 | 1999 Chevrolet Silverado 1500
Aug 19, 2011 | 2003 Chevrolet Silverado 1500
Jun 11, 2011 | 1999 Chevrolet Silverado 1500
Jun 17, 2010 | 2002 Chevrolet Silverado
Jun 06, 2010 | 1999 Chevrolet Silverado 1500
Feb 21, 2010 | 2000 Chevrolet Silverado 1500
Nov 04, 2009 | 2001 Chevrolet Silverado 1500
Aug 28, 2009 | 2001 Chevrolet Silverado 1500
Aug 05, 2009 | 1999 Chevrolet Silverado 1500
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: