Question about 2004 Dodge Neon

1 Answer

Dodge neon 2004: no turn signal/hazard warning lights

Could it be a burned out flasher? I have no idea what it looks like or where is located. Manual is a big help...., no diagrams on it.

Posted by on

  • hersol03 Jul 31, 2008

    thanks to 'spudsterier'.
    took it to a dodge dealer , they wanted $250.00 to replace the switch, the wife said no way jose!. them took it to a mechanic someone recommended, he replaced a $.50 fuse in the engine compartment, end of story. thank you!


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 48 Answers

The flasher is locaed in the fuse box in the dash. it looks like a small square box.
are both sides not working or just 1?

Posted on Jul 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the emergency flasher relay located on 2013 Rogue?


Here is what the service manual says. Looks like it is not a flasher relay but a function of the body control module.

TURN SIGNAL AND HAZARD WARNING LAMP SYSTEMSystem Description OUTLINE Turn signal lamp and the hazard warning lamp is controlled by combination switch reading function and the flasher control function of BCM.
TURN SIGNAL LAMP OPERATION - BCM detects the combination switch condition by the combination switch reading function. - BCM supplies voltage to the right (left) turn signal lamp circuit when the ignition switch is turned ON and the turn signal switch is in the right (left) position. BCM blinks the turn signal lamp.
HAZARD WARNING LAMP OPERATION BCM supplies voltage to both turn signal lamp circuit when the hazard switch is turned ON. BCM blinks the hazard warning lamp.
TURN SIGNAL INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are operating. - Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal indicator lamp according to the turn indicator signal.
HIGH FLASHER OPERATION (FAIL-SAFE) - BCM detects the turn signal lamp circuit status by the terminal current value. - BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating. NOTE: The blinking speed is normal while operating the hazard warning lamp.

Oct 13, 2014 | 2013 Nissan Rogue

1 Answer

2000 Dodge Intrepid "ES" model...turn signal/flasher doesn't work.


the flasher is under the dash on the drivers side. if you turn on the hazard lights and look under the dash you will see what turn signal flasher looks like and know which flasher not to change thinking its the right one. look for the signal flasher and change it.

Aug 24, 2014 | Cars & Trucks

1 Answer

I have a 2000 dodge neon the blinker on the drivers side is not working and its makes a buzzing noise.


this sounds like the flasher unit is no good and needs to be changed.it is located in the fuse panel under the dash on the drivers side.if you turn on the hazards and check all the bulbs for working,if they are working then you can look under the dash with the hazards on to find the flasher and this will show you what the signal flasher looks like at the fuse panel as they are two different units.

Apr 08, 2011 | 2000 Dodge Neon

1 Answer

Turn signals were working...but blinking fast. now they don't work at all...replaced fuse in side panel near door and still nothing. Everything else works..headlights, wipers, hazards..what gives?


you have a separate flasher for the turn signals.this is what your problem sounds like.if all your lights are working including the signal indicator on the dash then it will be the signal flasher.if you turn on the hazard flashers and locate it under the dash, this will show you what the turn signal flasher will look like.then you will have to look for the flasher unit on the fuse panel that looks like the hazard flasher.replace the turn signal flasher and you will have your signal flashers again

Mar 08, 2011 | 1996 Dodge Ram 1500 Club Cab

2 Answers

Where do i find the flasher for the indicator? the left light wont come on even thogh we bought a new bulb


Flashers and Relays REPLACEMENT Pickups The hazard warning flasher, on the pickup, is located to the left of the steering column, beneath the instrument panel, and is secured by a clamp and one screw. To remove it, simply unplug the electrical connector, loosen the screw, and slide the flasher out of the clamp. The turn signal flasher is located to the right of the steering column, beneath the instrument panel, and is secured in the same way as the hazard flasher. The turn the signal relay is located to the immediate right of the hazard flasher, and is secured by two screws. To remove it, unplug the electrical connector and remove the screws. MPV The relays and flashers are located under the dash, near the fusebox. Navajo Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel. prev.gif next.gif

Jul 15, 2010 | 1992 Mazda B-Series

1 Answer

Where is the Hazard/Turn Signal switch located in a 2000 Dodge Intrepid? My Turn Signals & Hazards stopped working without any warning and all light bulbs and fuses appear to be good. I have ordered a...


2000 Dodge Intrepid 2.7L SFI DOHC 6cyl

The Flasher is located front seating area, driver side, under left hand side of instrument panel between junction block and brake pedal.

Oct 30, 2009 | 2000 Dodge Intrepid

2 Answers

Signals work some of the time most times not . i changed the switch but same problem now io want to change the flasher but cant seem too locate it on the car please help thank you.


Hello, having same problem with my car hope this article helps there was a recall here's the information...

Recall Reason EXTERIOR LIGHTING:HAZARD FLASHING WARNING LIGHTS:SWITCH
Recall Date
AUG 28, 2003
Model Affected
ALERO
Potential Units Affected
670740
Recall SummaryCERTAIN PASSENGER VEHICLES HAVE HAZARD WARNING SWITCHES THAT MAY EXPERIENCE SOLDER JOINT CRACKING CAUSED BY RAPID TEMPERATURE TRANSITIONS AND THE SOLDERING PROCESS. IF SOLDER JOINT CRACKING OCCURS AND RESULTS IN AN OPEN CIRCUIT, THE TURN SIGNALS/HAZARD LAMPS BECOME INTERMITTENT OR INOPERATIVE.

ConsequenceWHEN THE TURN SIGNALS ARE INOPERATIVE, THE DRIVER CANNOT USE THEM TO SIGNAL INTENT TO TURN THAT COULD RESULT IN A CRASH.

RemedyDEALERS WILL REPLACE THE HAZARD WARNING SWITCH. OWNER NOTIFICATION BEGAN ON FEBRUARY 5, 2004. OWNERS SHOULD CONTACT CHEVROLET AT 1-800-630-2438, PONTIAC AT 1-800-620-7668, OR OLDSMOBILE AT 1-800-630-6537.

May 31, 2009 | 2000 Oldsmobile Alero

2 Answers

1993 Dodge Shadow...left turn signal won't flash


If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.

Apr 12, 2009 | 1993 Dodge Shadow

3 Answers

Dodge Neon 2000, turn signal stays lit ..does not flash. Intermittant issue..any ideas??


Try replacing the flasher first. If the does not fix it then you have a bad turn signal switch.

Mar 09, 2009 | 2000 Dodge Neon

1 Answer

Brake lights


Check your emergency flasher switch... if it located on the column it could have been "hit" and is inbetween the on and off location, this will cause the turn signals and break lights to malfunction

Jul 19, 2008 | 2001 Dodge Neon

Not finding what you are looking for?
2004 Dodge Neon Logo

812 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...