Question about 1992 Toyota Tercel

1 Answer

Cooling fan will not work

When fan is plugged up to connector will not run ,but when unplugged runs and the temp gauge soars way up, thought it would of blew the head gasket by now but it has not, car runs good but just need to fix this problem, so i can drive it more and i have changed the temp sensor and one more,i drive it with the fan unplugged so the fan stays on all the time, this is my second car that i need for the gas mileage only paid $400.00 for it and it runs good, just this problem, any answers

Posted by on

  • Anonymous Mar 23, 2014

    you can unplug the temp switch in bottom of radiator and both fans come on by themselves

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to replace the relay coolent switch and the thermal coolant switch to make mine work when its suppose to and to stop it from over heating i needed to change pluggs thermastat and anti freeze and adjust timing

Posted on Aug 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 montana cooling fans not coming on


A pontiac montana ? There are three relay's that control your cooling fans ! unplug what sensor ? The engine coolant temp. sensor is an input to the PCM - engine computer . When temp. reaches 213 degrees the PCM energizes the relays , depending on low or high speed . Using a scan tool to see if the PCM will turn on the fans an checking engine coolant temp.data is the right way to diagnose this . Relay Driven Dual Cooling Fan Diagnostics

Jan 21, 2017 | Cars & Trucks

1 Answer

I have a 1995 nissan altima.I changed the motor on it twice .The third motor I got from a 2000 altima ,same motor different year. Anyhow when running the motor,if I plug in the fan switch the fans will not...


You have quite a situation. It sounds as though the Coolant Temperature Sensor is faulty. That sensor will control the temp gauge in the dash as well as control the cooling fans when necessary. As to why the fans are constantly running whether the switch is on or not would mean that there is power to the fans bypassing switch, possibly from another connection in the harness. First off I would try replacing the fan relay, it may be stuck closed, just switch it out with another of the same type connection from the fuse box to see if there is any change. If that doesn't work then I would check to see if the wiring from the coolant temp sensor and the fan switch run through the same area of the harness. Its possible that you may have a short circuit at that point. That may possibly explain why the gauge is reading hot when the motor in fact is not. Hope this helps. Good Luck.

Nov 08, 2011 | 1995 Nissan Altima

1 Answer

What temp should my golf run at if the cooling system is operating properly? Runs perfectly on the highway but when i stop start it goes from min temp to only half on the gauge but seems to be runnning...


the temp seems to be fine. 80degrees celsius or less in stop and go traffic is normal,especially since the cooling fans are working and coming on at the proper time. the what seems to be running rough is another problem that doesn't seem to related to the cooling system temp. may want to check the spark plugs for worn electrodes.

Aug 08, 2011 | 1994 Volkswagen Golf

1 Answer

Electric cooling fans not working at any time while vehicle is running causing temp gauge to read high.while vehicle is moving temp gauge will go to normal.as soon as you stop temp gauge begins to...


{: ) You didn't mention the model of your vehicle. Anyway, I admire your way of observation, and I'm sure you got the analogy by now. When the car is running, the engine rpm is higher, and so with the water pump, plus the wind velocity passing thru the radiator fins, can give sufficient engine cooling without the electric cooling fans. But when your vehicle stops, like sitting on a traffic, the engine rpm is lower, and so with the water pump, and there ain't enough wind to help.
This is why the electric cooling fans are very important in maintaining engine temperature at normal levels in any driving conditions.
Basically, the cooling fans are controlled by the engine control module (ECM). The ECM monitors input from various engine sensors and then will give an output signal based on its programmed instructions. The output signals will energize the corresponding fan relays, be it high or low speed.
You can start by checking first the easy ones like the fuses and relays. Cooling fans usually have square top transparent windows. Check the the underhood fuseblock label to locate. Might as well check all fuses to be sure.
Check the cooling fan relays for signs of overheating, and also for loose terminal seating.
Check the cooling fan if stuck, and also check the connectors if burned or melted. To rule out a defective cooling fan motor, you can check for continuity, or you may apply direct voltage to the two wires on each fan.
The mostv frequent cause of cooling fan malfunction is on the fuses, relays, and connectors.

Jul 22, 2011 | Chevrolet SSR Cars & Trucks

1 Answer

Keeps running hot we changed radator cap and fan is not working right we changed a sensor and didnt stop it


In all probability, the fan is working erratically, or the air conditioning fan is not working at all. Does the vehicle run cooler when the air is off?. Do two things: 1) Check that the fan works after the vehicle has idled for a few minutes, and shows a normal temp (halfway on the gauge). 2) Check that the secondary /Air conditioning fan trips as soon as the A/C is turned on, even if the vehicle is cool.
On the event that either fan does not work, unplug the connector to the fan and check that it receives electricity. If it does, the fan is bad, and if it doesn't, something is wrong with the wiring or the sensor.

Jun 24, 2011 | 2000 Honda Accord

1 Answer

My cooling fan will not come on at all. I've changed the temp sensor and if I wire the fan direct, it works. Otherwise, if I'm in traffic on a hot day, it will peg the temp gauge. Could it just be the...


Try changing the coolant temp senor...Its usually by the thermostat by the housing....Start up your car and let it run for a bit.....then unplug the electric plug from the sensor....If you unplug it and the fan comes on....that sensor is your problem. Or it could be your coolant fan relay.

Nov 06, 2010 | 1995 Chevrolet Cavalier

1 Answer

2001 Neon cutting out, but only in the heat of the day


SOUND LIKE ENGINE RUNNING HOT.MAKE SURE COOLING FAN TURNING ON. WHILE ENGINE IDLING WATCH TEMP GAUGE AS THE TEMP CLIMB COOLING FAN SUPPOSE TO TURN ON IF NOT.CHECK FAN FUSE AND RELAY. IF BOTH GOOD HOT WIRE IT. NO RUN REPLACE FAN MOTOR IF FAN MOTOR DO RUN. YOU COULD HAVE A FAULTY COOLANT TEMPERATURE SENSOR OR SHORT IN FAN CONNECTOR OR WIRES. CHECK COOLANT LEVEL.MAKE SURE YOU HAVE 50/50 MIXTURE OF WATER AND ANTIFREEZE.TO BE ON SAFE SIDE REPLACE THERMOSTAT AND PRESSURE CAP.

May 30, 2010 | 2001 Dodge Neon

1 Answer

Gauge reads Hot but truck doesn't appear to be overheating - help


is antifreeze dirty looking and if was changed was it chemically flushed?

Jul 06, 2009 | 2002 Nissan Frontier Crew Cab

1 Answer

I have changed the relays and fuses checked cooling fans which worked when direct power was appied hooked everything back together fans still will not turn on also cooling fan sensor was changed also temp...


replace coolant sensor connector?if so can u get a thermo lazer gun to check the block temp? this will tell u if the gauge is incorect,,,go ahead a bleed all the air out of cooling system and see if that does the trick

Jul 05, 2009 | 2001 Chevrolet Malibu

2 Answers

98 Civic with non-functioning cooling fan


bad thermostat or worse a plugged heater core or bad summer/winter diverter valve. look for bad thermostat.

Dec 08, 2008 | 1998 Honda Civic

Not finding what you are looking for?
1992 Toyota Tercel Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...