Question about Mercedes-Benz C230

1 Answer

The gear is not changing - C230 Mercedes-Benz Cars & Trucks

Posted by on

  • agoede Oct 10, 2008

    suddenly my 2002 c240 sticks in the first gear. i've changed the
    electrical plate with the speed sensors and the filter but i still have
    the problem. the check engine light is on since i've got the problem.
    does anybody know the solution?

×

1 Answer

Just get it done.
see its endd and add some oil then its done

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Transmission wont change gear


Assuming auto transmission? check fluid level and linkages...

does it drive but won't change gear, or not select gear?

Feb 03, 2016 | 1995 Mercedes-Benz E 280

1 Answer

Loud snapping noise heard when changing gears


From the way you've described it your gear stick linkages maybe on there way out. When changing gear does the car resist getting into gear?

If it's more of a crunching sound then I would try double de clutching, to do this you need to:
change gear as usual but instead of holding down the clutch throughout the gear change hold it down to take the vehicle into neutral then release the clutch then push the clutch down again and change into desired gear.
To change down it's basically the same principal but you push down the clutch to put the vehicle into neutral then push the throttle down just to pitch revs then release the throttle and push the clutch down to change into your desired gear, if it won't go in to gear easily then rather the throttle until it does.

You can go onto youtube and search for double de clutching and I'm sure some results will come up

hope this helps!

Apr 30, 2014 | 2004 Nissan Altima

1 Answer

My 87 ford Turbo Coupe has a difficult time going into 3rd all other gears are fine


sounds like its bulk rings in gear box, they spin the gears ready as u change gear when they wear the gears are not spun enough to select u probably need to over hall gear box , to help u change gear for now double d clutch, whats this as u want to change gear push clutch down move out gear release.. clutch pushdown again put in to gear use this with each gear un need to change what this does is spin gear ready for u as if bulk ring had done it for u if u are good u can just change gear but have to b good for this

Nov 12, 2013 | 1987 Ford Thunderbird

1 Answer

Replacing gear cables on a kia sedona


To change the gear change cables unpop the sliver center shroud un do about 10 self tapping screw. un do 4 13 mm bolts on gear stick bracket. this is all after you have taken gear knob off . which is held on by cable tie. then pop the bonnet remove air box. and disconnect cables red and black one on gear box linkage. and in side un do inspection plate brhind centre console .

Oct 27, 2011 | 2004 Kia Sedona

1 Answer

I have a grinding noise in my transmission when I change gears what could this be


Possible wear and tear on the gear linkages/ the shaft/ the gears or the failure to notch.
All this relates to a possible fault within the gear box , check for PLAY of the gear levers/linkages, if worn out change them so that the links MOVE perfectly when the lever is moved to change the gears. Also check the gear box OIL within , if the oil seems to contain metal particles then you need to open the gear box without delay.

Jul 12, 2011 | 1995 GMC Sonoma

1 Answer

I want to change the mechanical oil seal for crank shaft


you need a gear puller to pull the gear off. but to change the seal for the crankshaft, you only remove the timing gear and change the seal on the cover that you removed. there is nor need to pull the gear itself. if you pull the gear, you still can't change any other bearings or seals without removing the heads and manifold.

Dec 07, 2008 | 2001 Kia Sportage

1 Answer

Changing gears very stiff


try 1 0f these solutions giving the cars age and not much discription.
1 check the level of your gear box oil

2 change the gear box oil or if automatic change the fluid for the transmision.( since you say changeing gears i take it that it's manual gear box.

3 if manual the gears need over hauled giving the age of your car.

4 your clutch cable needs adjusted due ware on the clutch or if hydraulic the clutch system needs bleed with new fluid.

Oct 18, 2008 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Clutch problem


Hi,
check out for worn out clutch plates . The second problem could with a worn out gear. Do all gears make a sound during the change or its the lower gears . Generally the First- second shift and Reverse gears cause this problem on the Accent .


Thanks
proton

Aug 04, 2008 | 1999 Hyundai Accent

3 Answers

Automatic transmission problem


I have 1998 Maruti Esteem Automatic gear car - It works smoothly for 10-15 Kms and afterwards gear not shifting (may be getting heated inside somewhere?) - Recently I changed gear oil also. Any solution???

Jul 01, 2008 | 1997 Suzuki Esteem

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...