Code that turns on the theft when the car is off?
First thing to check is the fuse panel. If all fuses are good inside the vehicle and under the hood in the power distribution box then you will need to test the wiper motor by using direct wire connections. Once you access the Wiper motor itself identify the ground wire buy using a Multimeter to locate the wire that provides a connection between the motor and a ground point. Ground that wire and apply power from a direct connection to the batter with a piece of wire and see if the motor will activate. If it won't then your wiper motor is most likely burned out. If it does work and the fuses are good the problem is your wiper switch.
SOURCE: 1990 Mercury Cougar windshield wipers won't work
check ALL fuses..check the wire connections at the wiper motor..un plug then plug in .the way to test the motor is to get some speaker wire (stop laughing) go from the battery to motor to by pass the switch .
239 views
Usually answered in minutes!
×