Question about Mazda 626

1 Answer

Engine shuttles when starts - 626 Mazda Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 330 Answers

Check your spark plugs, distributer cap and cables, sometime the wire leaks, if you put your car in the dark place during the night, turn on your engine, see if there is any spark from the cap and cable. if you see some spark, change it.

check your timing.

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes my1995 chevy pick up 5 speed not to go into gears easy after it gets warmed up but in the morning its fine till it gets hot or warmed up again then starts acting up again.


The valve body is worn to the extent that when engine heat warms up the transmission , pressure leaks around the shuttle valves in the body and then the trouble starts.

Aug 08, 2015 | Cars & Trucks

1 Answer

The Engine Temp gauge on my 130 TDI, 04, T5 Shuttle barely moves from its start point! Heating is not great either! Related?


sounds like there the same issue and I would first check the coolant level to make sure there is enough in it.

Jan 15, 2014 | Cars & Trucks

1 Answer

Does the engine management light come on if there is a problem with the gearbox Volkswagen transporter shuttle automatic


no, gearbox and engine are different, try to rplace the sensor switch of the engine light indicator.

Dec 02, 2012 | Cars & Trucks

1 Answer

When I start my engine a messages comes on the dash CATS SYSTEM FAULT


I don't know why you got shuttled to me. I'm sorry, but I can't help you with this problem. Re-post it, and ask for a Jag expert.

Nov 20, 2011 | 2000 Jaguar S-Type

1 Answer

I have a 1995 ford 4x4 with the 4.9 6 cyl. I have a problem with fuel delivery from the front tank.The truck idles real ruff when starting from the front tank but the not the rear tank.The problem with the...


Hi:
You might have two seperate problems:

If fuel is draining from the rear tank to the front, there is a tank shuttle valve located on the drivers side frame rail that is the most likely suspect to fix that.
It costs around $120 or so, and when it fails, you get that siphoning going on, and often the front tank wont pump at all.
In your case, if the engine is running rough off the front tank, you might have another issue, such as a bad in tank fuel pump, but the shuttle valve needs changed first , so maybe it might fix the other problem too!

Apr 21, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

1994 ford e-450 shuttle bus 7.3 liter non turbo


change the delivery fuel pump right before the injector pump should 100% solve the problem. thanks

Mar 26, 2010 | 2009 Ford F-450 Super Duty

1 Answer

The hill descent, abs and tracking lights have come on two times within the last week. They come on while driving and will not come back on when the engine is started.


Suggests either Wheel Bearing, ABS Sensor Fault, or Shuttle valve. Best to get it to a dealer and on the computer for them to diagnose what exactly is wrong.

Feb 10, 2010 | 2003 Land Rover Discovery

1 Answer

Discovery II Right Rear keeps going down


No, the Shuttle Valve would give you the "3 Amigos" on the dash, ABS, HDC and TC will all illuminate. Your problem is probably an air leak in one of the bags (£100 or so), which you should replace as your compressor will be working harder than it should be, and will eventually also fail!
Could also be the height sensor (£35) but that is less likely.

Aug 03, 2009 | 2001 Land Rover Discovery Series II

1 Answer

Car misses and sometimes the engine light comes on


With the engine running spray come carb cleaner into the intake and see if there is a slight improvement. Then add some more cleaner into the fuel at the fuel filter. Start the engine & shuttle pump the throttle to clear all nozzles. Also check the plugs and rub it with sand paper and adjust the gap appropriately, and if its all blackish or the spark points have worn out, then change them......................sodeep

Jun 28, 2009 | 2001 Dodge Neon

3 Answers

Warning lights staying on after engine started


probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS unit very expensive

Mar 08, 2009 | 2000 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...