Question about 1993 Honda Accord

2 Answers

Serpentine belt How do i put a serpentine belt on my 1993 Honda Accord?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

1993 honda accord doesnt have a serpantine belt, it has a v-belt system. that is the altenator belt and powersteering belt (both belts run multiple pulley of course). my recomendation is to buy a chiltons repair manual-or haynes-as the proper tightening bolts and locking bolts may be confusing to an inexperienced person.
ALTENATOR: loosen the altenator mounting nut/bolt and through-bolts, turn the adjusting nut until there is enough room to wrap the belt around the proper pullys and tighten with adjusting bolts until proper tension is reached. tighten the mounting nut/bolt and through-bolts to 33ft lbs tq
POWER STEERING: loosen the pump through-bolt and nut. turn the adjusting bolt until there is enough room to wrap the belt around the proper pulleys and tighten the adjusting bolt until proper tension is reached. use 33ft lbs tq on through bolt and nut.
ALWAYS ENSURE PROPER TENSION IS AQUIRED- NOT TOO MUCH OR TOO LITTLE, AND ALWAYS RUN ENGINE AND TIGHTEN OR LOOSEN AS NECESSARY.
check tensionperiodicaly to ensure proper opperation

Posted on Mar 08, 2009

  • diggldoo Mar 08, 2009

    if a 4cylinder engine

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Hey there hardrock,

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator.
  • The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Mike

Posted on Dec 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt for 1991 honda accord. does it need two belts if replacing serpentine


If it has a Serpentine belt then it only has one belt unless the timing chain is a belt but no you dont.

Jul 06, 2016 | 1991 Honda Accord

1 Answer

Need to know where to find a routing diagram for the serpentine belt on a 2000 honda accord lx 4 cylinder


see the following site that I found by googling "2000 honda accord serpentine belt replacement" You will need to know what engine size and whether you have AC.
https://www.google.com/search?q=2000+honda+accord+serpentine+belt+replacement&client=firefox-a&hs=zDs&rls=org.mozilla:en-US:official&tbm=isch&tbo=u&source=univ&sa=X&ei=ylF4UoS5O6zfsAS8oYCgAg&ved=0CFgQsAQ&biw=1280&bih=896

Nov 04, 2013 | 2005 Honda Accord

1 Answer

How to replace serpentine belt on 1995 Honda Accord LX


alldata.com
old post but here is the answer to that and 10,0000 other questions.

Jul 16, 2013 | 1993 Honda Accord

1 Answer

Change 93 honda accord timing belt. Need steps to correcly replace timing belt.


google= how to place a timing belt on a 1993 honda accord

Jul 08, 2010 | 1993 Honda Accord

1 Answer

My 1993 honda accord SE is overheating


It's certainly the water pump. Have the timing belt and balancer belt changed at the same time.

Jun 10, 2010 | 1993 Honda Accord

1 Answer

When putting a new water pump in a 1993 honda accord do you have to change the timming belt also? the belt has only 40,000 kil. on it.


the belt doesn't hav to be changed but there's nothing wrong with putting new parts on a car if u can afford it.

Apr 21, 2010 | 1993 Honda Accord

2 Answers

1993 honda accord timing belt tensioner


timing belt tensioner should be spring loaded. its tight up there but you'll have to push the tensioner either up or down and slide the belt over it.

Feb 11, 2009 | 1993 Honda Accord

1 Answer

How to put a new timing blet on a 1993 honda accord LX 2.2 L


well chances are you now have bent valves , if you bought the car with a bad timing belt then most likely the valves are bent since that motor is an interference engine.

Feb 08, 2009 | 1993 Honda Accord

2 Answers

The timing belt on my 1993 honda accord broke. I'm trying to find


Tackling a timing belt replacement is not for the inexperienced person (not saying you are) but this is a complicated replacement. Seek professional help.

Jan 23, 2009 | 1993 Honda Accord

Not finding what you are looking for?
1993 Honda Accord Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...