Question about 2001 Ford Explorer

1 Answer

2001 ford sport trac with power rear window

Was putting window down , but half way turned knob to go up and wouldn;t
tried down and it worked ok but now home tried to put window up won't go or make asound checked right the motor ,had someone else turn the knob both ways no hum even fuse is ok

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 70,346 Answers

You have an electric window right? if so the motor brushes are most likely stuck ( common concern), try hitting the bottom front of door panel with palm of your hand while holding the switch to down or up, if the window springs to life the motor is defective, in any event you need to pull the door panel and test the motor for 12 volt signal to one of the terminals, 12 volt signal will reverse on the connector depending which direction the switch is held to operate the window. If the 12 volts is prsent replace the motor, I wopuld recommend rockauto web site for best price.

Posted on Jul 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to windows on 2001 ford explorer sport trac


Power loss to the master switch somewhere. I just fixed mine (97 Ford) by bypassing power source from the ignition switch and replacing it with the one running the mirrors. Works fine.

Aug 27, 2012 | 2001 Ford Explorer Sport Trac

1 Answer

Up and down movement on rear axle 2001 ford explorer sport trac


how do i pull out rear axle from my 2001 ford explorer sport trac

Jul 04, 2012 | 2001 Ford Explorer Sport Trac

3 Answers

My back automatic window went down and now won't come back up. No sound from motor. Checked fuses. Even took back seat apart but don't know what to do or what caused it. How can I get window to go...


it may need to be reset.

SECTION 501-11: Glass, Frames and Mechanisms 2001 Explorer Sport/Sport-Trac Workshop Manual
GENERAL PROCEDURES Rear Window Motor Initialization s1r~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure that no obstructions are present in the power rear window system when carrying out this procedure.
NOTE: This procedure must be carried out when repairs are performed on any part of the power rear window system including when: the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.
NOTE: All power rear window components (window glass module, window regulator, window motor, and glass runs) must be installed and torqued to specification before carrying out this procedure.
NOTE: Steps 1-6 must be completed within 30 seconds. The entire procedure must be completed within five minutes.
NOTE: Once the ignition key is turned to the ON position in Step 6, it must remain on until the entire procedure is completed.
NOTE: Steps 7 and 9 require that the power rear window control switch be held in the closed position until the power rear window motor stalls the window in the upper header seal. Step 8 requires that the window control switch be momentarily turned to the open position.
  1. Start with the ignition in the OFF position.
  1. Turn the ignition to the ON position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the OFF position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the ON position. The power rear window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has entered initialized mode.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls in the upper header seal.
  1. Momentarily rotate the power rear window control switch to the open position and release. The power rear window will carry out a one-touch down operation until the window stalls at the bottom of the travel stop designed into the window regulator.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls into the upper header seal. Once this operation is complete, the window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has been successfully initialized.
  1. Verify correct operation of the power rear window by moving the window to the fully open, vent, then fully closed positions.
------------------------------------------------------------------------------------
  • The power rear window is inoperative (Explorer Sport Trac only)
  • Circuitry.
  • Battery Junction Box (BJB) fuse 3 (30A).
  • Central Junction Box (CJB) fuse 20 (7.5A).
  • Power rear window control switch.
  • Rear window glass motor.
  • Go To Pinpoint Test K .

------------------------------

Sep 15, 2011 | 2001 Ford Explorer Sport Trac

1 Answer

2001 ford explorer sport trac wont start all the function turn on


check what the diagnosis machine will give if there is no data then check if the starter crank sensor is getting any power

Jul 26, 2010 | 2001 Ford Explorer Sport Trac

1 Answer

I have an 2002 sport trac with an power rear back window not work


Try a Glass shop. There should only be a motor and a switch. The glass shop should be able to get the window closed for you if it is open.
The power rear window is an option, so I do not know how easy it is to find parts in a salvage yard. It may not need anything big, could be an adjustment.
You can call for estimates once you identify the TRUE problem.

Aug 30, 2009 | 2002 Ford Explorer Sport Trac

1 Answer

2001 ford explorer sport trac.When applying the brakes in a hurry they act as though the rear brakes arent working.The anti lock seems to be ok how about the proportional valve is there some reset button ?


have you replaced front brakes 3+ times? normal wear is 3 front to 1 rear. plus ratio of braking for MOST veh's is 70% front vs 30% rear. rears could simply have worn out!

Dec 22, 2008 | 2001 Ford Explorer Sport Trac

2 Answers

Driver Window


Sounds like a motor, or a s stuck mechanism. Either way the door panel must come off and this is no easy task.

Aug 04, 2008 | 2001 Ford Explorer Sport Trac

Not finding what you are looking for?
2001 Ford Explorer Logo

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...