Question about 1997 Nissan Maxima

1 Answer

97 nissan maxima

My 97 nissan maxima stumbles(hesitates)when im stopped but when i put it in neutral the engine idles fine..

Posted by on

  • 4 more comments 
  • Anonymous Jul 15, 2008

    I loose rpm's while running on freeway and hesitates and shuts off at stops, I put it in neutral and accelarate in order for the engine not to purn off. Check engine light on with come P1105.

  • omoran2958 Jul 15, 2008

    i changed the spark plugs to ngk and it works perfect........i had champion plugs they told me those are not good for the maxima....

  • Anonymous Nov 30, 2008

    when turning i hear a popping noise but only when i turn sharply? is it the ball joints or the axles?

  • Anonymous Mar 12, 2014

    my 2000 nissan maxima is hesitating and sometimes dying, whAT IS PRBLEM?

  • Anonymous Mar 13, 2014

    2003 nissan maxima idle high

  • Anonymous Mar 18, 2014

    I hesitated doing work since mechanic said I could drive. Original problem was gauge on one occasion was at "H" and when I left mechanic, my friend looked at hood and said I had no water & put in water. Was that correct thing to do?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 67 Answers

Throttle position sensor,or egr valve,also check your air filter,if this helps please gine me a fix ya vote

Posted on Jul 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

When accelerating nissan altima 2.5 hesitates

first thing i would try is a new fuel filter,,if that dosen't solve it,the best thing to do is get a scan to see which sensor might be going bad.

Jan 13, 2013 | 2005 Nissan Altima 2.5

2 Answers

92 dodge 1500 pick up 360 v8 automatic Starts, runs but hesitates, low power code 37 on diagnostic readour

Code 37 is torque converter clutch solenoid failure. Transmission wont shift in and out of overdrive.

Nov 28, 2012 | Dodge Cars & Trucks

1 Answer

Ford Taurus idle missing

It can be issue with IAC( idle air control valve) causing the problem.

There are many other possibilities causing these idle issues.Engine idles rough.

There are few help links with solutions to troubleshoot such idle issues.

I suggest you refer the link below and follow its troubleshooting details:------

Click the link below:-----
Bad miss at idle?

Stumbling and stalling at idle after engine rebuild?

1999 Ford F-150 Idles rough and quits when gas pedal is pressed less?

Engine stumbles coming off idle when warm?

Erratic idle on car?


Cold start problem and vehicle shudder around 2500 to 3500 rpms

Low idle when cold out side?

GMC Sonoma Stalls and idles low


GMC Idle Air Control (IAC) Valve Replacing?

1996 Camry intermittent engine failure while idle?

Engine quits at idle?

Car overheats and Air blows hot at idle?


High Idle Problem

While stop engine idles like cylinder missing?

Idle flair is noticed on car? Rough idle? car will not idle? Erratic idle speed?

High rpm in neutral? Inconsistant high RPM in neutral?

Vehicle stumbling at idle and shows code 54?

Rough idle, staling and Erratic shifting?

While stop engine idles like cylinder missing?


These details will help.


Nov 24, 2012 | 2001 Ford Taurus

1 Answer

'97 Nissan Maxima shakes really bad when idling!

vacuum leak, egr valve, crank or cam sensor......

Dec 23, 2017 | 1997 Nissan Maxima

2 Answers

95 Maxima engine stalls, then runs fine

change the mass air flow meter.You have nothing to lose that supposed to be changed at 60.000.miles

Jun 11, 2009 | 1995 Nissan Maxima

1 Answer

No sparks from spark plugs in the 97 nissan maxima wont start up

This car has seporate coil packs for each cylinder, have you tried swapping the front bad one with a good one to see if they switch ?
The engine you just put in may have come with some blown coils.
Hope this helps

May 13, 2009 | 1997 Nissan Maxima

2 Answers

Car dies

check air flue meter.take a matchstick and push into the hose .if it works change air flue meter

May 04, 2009 | 1997 Nissan Maxima

Not finding what you are looking for?
1997 Nissan Maxima Logo

Related Topics:

600 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

77932 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides