Question about 2001 Honda Civic

1 Answer

Cylinder head R and R

2001 honda civic LX 1.7 litter head bolts torque and exploded replacment diagram

Posted by on

  • Anonymous Mar 23, 2014

    need to replace head gasket

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 421 Answers

Any competent repair shop or the dealer can give you this, make sure to use new bolts as these are most likley streach fasteners or tourqe to yeild and only work properly once -jeff

Posted on Aug 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the spark plug torque Specs on a 95 Honda Civic LX 1.5 liter.


Torque Chart - E3 Spark Plugs

e3sparkplugs.com/torque-chart/
The table below lists the torquing specifications for most spark plugs being installed in either cast iron or aluminum cylinder heads. Torque values assume clean, dry threads.

Tech Specs - Spark Plug Cross Reference, Torque ... - Autolite


Nov 25, 2015 | Honda Cars & Trucks

1 Answer

Head torque specifications


Torquing the head bolts is done in 4 steps.
step 1 14 ft/lbs
step 2 36 ft/lbs
step 3 49 ft/lbs
step 4 retourque bolts 1 and 2 at 49ft/lbs.
Use this diagram for the torque sequence.
53fa97e9-4910-4532-9ee1-f6b8fdc76831.png

Aug 14, 2014 | 1998 Honda Civic

1 Answer

Torque spec on head for 1986 civic si 1.5liter


Help need torque spec for cylinder head bolts 1986 honda civic dx 1.5 pls...

Mar 10, 2012 | 1986 Honda Civic

1 Answer

99 Honda civic 1.6 engine torque specs and sequences for cylinder head


Tighten the cylinder head bolts to their final torque specification in two steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts.
  1. Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
  2. Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).

zjlimited_1681.jpg

Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)

Hope helps.

Aug 05, 2011 | 1999 Honda Civic

1 Answer

Torque para cabeza honda civic motor 1.6


1996-97 Civic and Civic del Sol
1.6L (D16Y5, D16Y7 and D16Y8) ENGINES

Tighten the cylinder head bolts to their final torque specification in four steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows:
  1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
  2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
  3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
  4. Step 4: Retighten only the two center bolts to 49 ft. lbs. (67 Nm).

Hope helps (remember to rate and comment this).

Sep 23, 2010 | 1997 Honda Civic

1 Answer

Hi what is the head torque on a 2002 honda civic


Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then

    1. Tighten the cylinder head bolts to their final torque specification in 4 steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).
    1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
    2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
    3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
    4. Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).


  • Mar 25, 2010 | 2002 Honda Civic

    1 Answer

    What are the cylinder head bolt torque for 2000 dodge caravan 2.4L


    these are done in three stages 1:tighten all bolts to 25ft lbs. 2nd: all bolts to 50 ft lbs 3: retighten all bolts to 50ft lbs. the last stage is to tighten all bolts 1/4 turn more. do not use torque wrench for the last 1/4 turn hope this helps

    Feb 06, 2010 | 2000 Honda Civic

    2 Answers

    Need torque settings for honda ballade cylinder head bolts


    dear friend-your torque setting is cold 66 nm

    Jul 23, 2009 | 1998 Honda Civic

    Not finding what you are looking for?
    2001 Honda Civic Logo

    Related Topics:

    245 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    61292 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...