Question about 2006 Dodge Grand Caravan

2 Answers

2006 Dodge Grand Caravan - EGR code

2006 Dodge Grand Caravan - 3.3L - code 0406 - exhaust gas recirculation sensor A circuit high

engine light comes on then goes off, comes on again a couple of days later, etc.

Is sensor in EGR valve assembly or located elsewhere?

Should I just replace EGR valve?

Leave on vacation Friday AM - expect to put on 1200 miles.

Thanks

Posted by on

  • 13 more comments 
  • WBILLDEB7 Sep 20, 2008

    I HAVE THE SAME PROBLEM WITH A 2006 CHRYSLER TOWN&COUNTRY WILL REPLACING THE EGR VALVE FIX THE PROBLEM

  • Anonymous Mar 12, 2014

    2006 dodge caravan idle 1200 RPMs

  • Anonymous Mar 13, 2014

    code P0032 on a 2005 dodge grand caravan

  • Anonymous Mar 15, 2014

    rough when idle after replacing egr valve coils an plugs error codes p0404 p0300 p03002 p03003 p03001? help please

  • Anonymous Mar 16, 2014

    reads error code 5 of 8.2 what does this mean

  • Anonymous Mar 17, 2014

    I have a 2001 Dodge Grand Caravan that would not stay started a change to Meijer sensors that I may see you try to body position sensor and it does not still stay started I have to keep my foot on the gas to keep a runnin what can I

  • Anonymous Mar 18, 2014

    CAR IS GIVING ME A CODE P0171

  • Anonymous Mar 19, 2014

    airbag light reset

  • Anonymous Mar 21, 2014

    can unplugging the egr valve on a 2001 dodge ram 1500 5.9 360, get you better gas mileage?

  • Anonymous Mar 22, 2014

    I have the 2.7L and I am in the process of replacing the egr valve because I am getting code 0300. I can not find the existing egr valve

  • Anonymous Mar 27, 2014

    blower not working

  • Anonymous Mar 29, 2014

    there is loose play in the steering wheel of my dodge grand caravan with or without the engine running

  • Anonymous Mar 29, 2014

    steering wheel has loose play in 2006 dodge grand caravan with and with out engine running

  • Anonymous Mar 31, 2014

    Where is egr valve 98 caravan 3.3.

  • Anonymous Apr 01, 2014

    I replaced the erg valve and i need to know how to clear the code so the check engine light will go off

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

I replaced the EGR Valve ($80 after tax), problem solved, vanruns great now. Now my problem is that I can't get the light to turn off.

Posted on Oct 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Did you unplug the negative cable on your battery for two minutes? When you do this it should clear the code. You may experience some issues for the first fifteen minutes of driving while the computer relearns from the new EGR.

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P 0406 P0406 Exhaust Gas Recirculation Sensor A Circuit High


Replace the EGR valve & check the vacuum lines for it at both ends

Dec 25, 2013 | 2006 Dodge Grand Caravan

1 Answer

P0408 engine light


code po408 refers to exhaust gas recirculation(EGR) valve position sensor high input===causes--wiring---EGR valve position sensor--ECM . Try replacing the sensor for the EGR unit.

Oct 01, 2013 | 2005 Dodge Caravan

1 Answer

I have a 2006 Dodge Magnum that the engine light is on the trouble code is 0406 any thoughts on what the code stands for or why my engine light is on.


  • Gas sensor re circulation sensor "A" Circuit High.
  • Replace the EGR and the solenoid (come with it) and this will fix the problem.


  • Diagram for 2.7L & 3.5 L
ironfist109_33.gif

  • *** Please note if you have the 5.7 Hemi - the EGR is located under the intake.***
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jun 20, 2011 | 2006 Dodge Magnum

2 Answers

I have a dodge grand caravan 2006 with trouble codes p0126 and p0406 what does that mean? and how can I fix it?


Hi, sorry I don't have a manual for your van but here is some general information for these codes.

P0126 Insufficient Coolant Temperature for Stable Operation:

basically, the engine is running cool. Check your thermostat to see if it's closing properly. If it is closed when removed, you may want to get a higher temp thermostat. The thermostat is usually in a housing bolted to the engine at the end of the upper radiator hose.


P0406 Exhaust Gas Recirculation Sensor A Circuit High:

This indicates the EGR position sensor signal is out of range. The problem could be the wiring or the sensor itself. Check the wiring first. If it looks good, consider replacing the sensor. I think in your van the sensor may be integrated into the EGR valve itself.

EGR valve:
jturcotte_491.jpg

May 08, 2011 | 2006 Dodge Grand Caravan

2 Answers

2007 Dodge Grand Caravan Engine Light Code P 0405 ?


P0405 is an Exhaust Gas Recirculation fault. This could be a faulty valve. You could try cleaning the valve first, chances are it will need to be replaced in the long run. Hope this helps...

Mar 10, 2011 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

Egr code what does it mean


if its the 3.3 then the code would be--0406 egr sensor A curcuit high--- the common fix is to change the egr valve assembly which includes the egr transducer. This egr valve has also a high failure rate and you can check this out by calling the Dodge parts dealer. good-luck !! once egr valve is replaced. have light turned off with scanner. because if it stays on, pcm thinks it still has the problem. it will not send right info to pcm.

Jan 29, 2011 | 2006 Dodge Grand Caravan

1 Answer

What will be wrong if I got code p0406 and p 404


both codes po406 and po404 refer to a fault in the EGR system
Po404 > Exhaust Gas Recirculation Circuit Range/Performance not within proper range.
Po406> Exhaust Gas Recirculation Sensor A Circuit High (meaning the circuit is open or disconnected)
Without actualy checking the voltages (wiring)
Replace the EGR valve
clear codes
test drive

Sep 07, 2010 | 2005 Dodge Caravan

1 Answer

2005 Dodge caravan 3.2 code 406? is this an


This code is for the EGR valve, "P0406 Exhaust Gas Recirculation Sensor A Circuit High", this doesn't necesarily mean you need to change your EGR valve but it's probable. Check with your dealer this just might still be covered.

Jun 06, 2010 | 2007 Dodge Ram Truck

Not finding what you are looking for?
2006 Dodge Grand Caravan Logo

2,284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...