Is the 2.0 a interference motor. - 1995 Volkswagen Jetta

no motor stated
but its not.
not in 1995
the list

• 2.1L Diesel Interference
• 2.4L DOHC Non-Interference (Valves may hit if camshafts turn out of time)
• 2.8L Diesel Interference

Chrysler

• 1.4L, 1.5L & 1.6L Interference
• 1.7L Non-Interference
• 1.8L Interference
• 2.0L DOHC Interference
• 2.0L SOHC Interference
• 2.2L DOHC Interference
• 2.2L SOHC Non-Interference
• 2.22L SOHC Interference
• 2.3L Diesel Interference
• 2.4L DOHC Non-Interference (Valves may hit if camshafts turn out of time)
• 2.4L SOHC Interference
• 2.5L 4 Cyl. Non-Interference
• 2.5L V6 Interference
• 3.0L SOHC 12 Valve Engine Non-Interference
• 3.0L DOHC Interference
• 3.0L SOHC 24 Valve Engine Interference
• 3.2L Interference
• 3.5L Interference
• 4.0L Interference
• this should be what your looking for.

The S60 model has a 2.4 five cylinder engine. That engine is not an interference engine.
The S80 uses a 6 cylinder 2.8 or 2.9 engine if it is sold in the US.

ALL B230 motors (excluding the B234) are non interference motors. The answer in the first space is incorrect!

If you are referring to a dual overhead cam , It is a interference engine if its regular then no

You either have the belt 180 degrees off. So you have to take belt off and turn crank only (slowly) around once to its mark again, but first you need to go to a website that lists motors that are called "interference fit" engines. (Think Gates belt co. has a list) If your motor is an interference fit then when belt broke the motor is trashed. Interference fit means that pistons can hit valves if the belt breaks. That is why they tell you to replace the timing belt before too long. Also if motor is interference fit when you try and turn crank go slow because you may bump into valve.

Hi More than likely, most of the Mazda range are identified as an interference, in other words when the timing belt breaks or slips the pistons will hit the valves, my advice change the belt and then compression test the cylinders before removing the head just in case god smiled on you,

yes it is checked on the autodata and all of the 1.5 engines are interferance engines sorry for the bad news

The 4G93/1.8L is an interference engine.

Yes I double Salkim08's solution. Since your motor is made from Aluminum, this could be a big sign that it is an interferance motor. Aluminum expands twice as much as iron. Most old fashion V motors ( v6's V8's) are made with an Iron block and Aluminum heads. But new Transverse motors( sideways front wheel drive motors), block and cylinder head, are made of aluminum.