Question about 1990 Toyota Land Cruiser

1 Answer

12/1990 LANDCRUISER WANT TO FIT THE BACK TWO FOLD UP SEAT INTO IT. BARN DOOR STYLE

G'DAY , I HAVE BOUGHT THE BACK TO FOLD UP SEAT OUT OF A 1991 CRUISER GXL AND WOULD LIKE TO INSATLL THEM IN TO MY 12/1990 CRUISER BUT THERE IS NO MOUNTING HOLES FOR THE SEAT. ALL THE MOUNTING HOLES ARE THERE FOR THE SEAT BELTS.. IS THERE A SPECIAL BRACKET NEEDED TO DO SO???

Posted by on

  • DARREN T Oct 11, 2008

    G'DAY HAVE HAD THE SAME PROBLEM WITH MY 12 1990 80 SERIES. THE ONLY WAY I COULD GET MY SEATS FITTED WAS BY A SEAT ENGINEER AS YOU NEED A COMPLIANCE PLATE FITTED AS WELL FOR INSURANCE.

    THE BRACKET THAT YOU NEED FOR THE WHEEL ARCH IS WELDED IN TO THE GXL MODELS BUT YOU CAN BUY THEM FROM TOYOTA OR A NON GENUINE STOCKER. THE SAME AS THE BRACKET THAT LATCHES THE SEAT TO THE FLOOR IN THE MIDDLE ON THE FLOOR. THE FLOOR ONE IS KNOW PROBLEM AS THIS CAN BE BOLTED IN BUT THE WHEEL ARCH ONE NEEDS TO BE WELDED IN . THIS IS WHERE YOU NEED THE ENGINEER, AS WELL AS HIS COMPLIANCE PLATE .THE INSURANCE COMPANY AND TRANSPORT DEPT WILL NEED THE COMPLIANCE PLATE NUMBER TO KNOW THAT THE SEATS WERE FITTED PROPERLY AND SAFELY. IT COST ME $150.00 FOR THE PLATE AND $100.00 FOR THE THREE BRACKETS [2 WHEEL ARCHES LEFT AND RIGHT] THE CENTER BRACKET IS ONE BRACKET FOR THE 2 SEATS. I FITTED THE CENTER BRACKET MYSELF. BUT HAD TO LEAVE THE LONG RANGE TANK OUT SO HE COULD SEE THAT IT WAS DONE RIGHT. AND $200 FOR HIM TO WELD THE 2 WHEEL ARCHE BRACKET'S SO ALL UP WAS STILL CHEAPER THAN BUYING A NEW CAR AT $450.00. YOU THAN HAVE TO GO TO TRANSPORT DEPT TO SHOW THE PLATE TO THEM AND THEN RING THE INSURANCE COMPANY AND LET THEM KNOW THAT THE CAR HAS BEEN CONVERTED TO A 8 SETTER INSTEAD OF A 6 SETTER.

    THE BRACKETS I BOUGHT FROM RAWNSLEY AUTO IN BUNDERBERG QLD ENGINEER WAS SCOTTS ENGINEERING IN BUNDERBERG QLD



    ANYWAY I HOPE THAT THIS HAS HELPED YOU .

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 221 Answers

Yes, you can get one from an Authorized Service Station.

Posted on Jul 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i adjust the paasenger seat in my 1999 VW beetle?


There is a D shaped handle on the side of the seat nearest the door. Lift up on it and the seat back will fold forward, and the entire seat mechanism will lift up and to the front, giving your passengers room to get into the back seat. Simply push the seat back toward the rear of the car to set it back in place; it will lock itself down once it's back in its original position.

May 16, 2014 | 1999 Volkswagen Beetle

1 Answer

How to get seat back off or to fold down in back seat of Tundra double cab truck


If its the current body style that the rear seats do not fold down. The seat can be removed by removing the nix bolts that hold it to the vehicle. The. Pull up on the seat back to disengage the back retainers.

Apr 07, 2013 | Toyota Cars & Trucks

1 Answer

Will 1991 mitsubishi 3000gt door glass fit a 1993


it should. they are both 1st gen. body style. same with a stealth, it will work too.94 is start of the second gen. body

Feb 14, 2010 | 1993 Mitsubishi 3000GT

1 Answer

91 landcruiser 80 series gxl replacement drivers seat


You can get a replacement seat from a wrecking yard and would guess you would pay around $75.00 to $100.00 for the seat or you could go to a reupholster and have it redone like new for somewhere around $150 to $200.

Oct 05, 2009 | 1991 Toyota Land Cruiser

1 Answer

I want to replace my middle backseat belt. How can I fold the seat or get to it?


I believe the rear seat backs fold down in this model. Fold them down and the bolts should be visible

Sep 10, 2009 | 1991 Toyota Camry

2 Answers

How do I fold down the rear seat of my 1991 dual cab rodeo ute?? I cant find a catch or anything, any help much appreciated!


pull up the bottom of the seat, where it joins the back seat.if it a flip forward design, there will be a ******** the bottom of the back seat to release it.

Jul 22, 2009 | 1991 Isuzu Rodeo

3 Answers

Friend of mind just bought a 2006 tundra v-8 with no owners manual and cannot find where the jack is located in the truck


I just bought a 2005 Tundra Limited and had the same problem. You will find the jack under the rear passenger seat. First you must pull the handle located on the sie of the seat centered between the back and seat protion and fold down the back part of the seat. Then pull the handle located near the bottom of the seat and close to the floor. Fold the rear seat over toward the front seat and you should have full view of the storage box in the floor containing the jack. I'm still looking for a manual for this vehicle,

Feb 21, 2009 | 2006 Toyota Tundra

1 Answer

Front Seat Broke/Fold Down Arm rest broke


i have to 60/40 seat with a fold down console,

Sep 18, 2008 | 1991 Ford Ranger Supercab

1 Answer

How to fold down back seat


There should be a loop between the seat and backrest, pull that and the seat will pull toward the front seats. After that, pull the lever located at the outside of the backrest. This lever is on the outside of the seat by the door-side of the seat. Pull that up and allow the backrest will fold down and the headrest will pivot back and your seat is folded down.

Jun 28, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
1990 Toyota Land Cruiser Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...