Question about 2002 Chevrolet Blazer

1 Answer

Power window driver side

I'll probably have to have a mechanic do this for me but thought I would throw it out to you all first.
Lowering power window got stuck halfway down. Tried to put back up and started tilting forward instead of going straight up. Took off door panel and found metal plate with motor and spring had pulled out all 4 rivets from door frame. How do I get old rivets out and could I use some bolts and nuts to repair?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Well u could use a drill to drill the out or just use some plyers to pryer them out and u could use screws to put back but just make sure they dont block anything or get in the way of anything our u could buy arivet gun to put back

Posted on Jul 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electric window (driver side) works, but why not the other three?


Power Windows Not Working - Repair Power Windows

www.popularmechanics.com/cars/how-to/a69/1272371/
Another toll-booth, another mile--or at least it seems as if the tollbooths come every ... The most common power window mechanism is pretty basic. ... If the driver's door switch won't open the right rear door, but the switch in the ... direct from the battery positive terminal to the positive side of the motor to see if it comes alive.

Power Windows not working - CarGurus

www.cargurus.com > Questions > Honda > Accord

CarGurusOct 9, 2012 - I have a 2007 Honda Accord the driverside window works but other 3windows dont, but when u hit the master switch on drivers door to try to ...

I can only operate one of three power windows - CarGurus

www.cargurus.com > Questions > Chevrolet > Prizm

CarGurusApr 28, 2013 - Drivers side power window works only. Had a mechanic ... windowsnot working either. ... Already replaced it. all switches showing getting power but don'twork. ... Are you certain that the other three window motors are good?

Why Do My Power Windows Sometimes Stop Working ...


Dec 21, 2015 | Cars & Trucks

Tip

Power windows are not working


Power windows pretty much come standard on all new vehicles, and they are usually pretty durable, but sometimes they will fail. The window will go down but not back up, or all you hear is a clicking or grinding noise noise when you press the control switch. Or when you press the Power window switch, you get nothing. These are two separate problems, and knowing the difference is the first step in diagnosing any power window or power window switch problem. If you press the power window switch and all you hear is a grinding or clicking noise, or the window acts like it wants to move, then stops and makes noises, then chances are you have a mechanical failure and will probably need to replace the power window regulator or motor. If you press the motor and hear nothing or the window does nothing, then you may have a Blown fuse or an open or short in the wiring circuit that supplies the power window circuitCheck the fuse first. Refer to your owner’s manual for the location of the fuse panel (usually located under the dash on the driver side, on the driver’s side kick panel, or on a side panel in the center console. Locate the numbered fuse that corresponds to the power window circuit, then pull out the fuse to see if the wire inside has burned through or is broken.If the fuse has blown, there is either a short or an overload in the power window circuit. Try replacing the blown fuse with a new one (make sure it has the SAME amp rating as the original, not lower, not higher). Then turn the ignition key on and try to lower one of the power windows.If the new fuse blows immediately, there is a short in the wiring that will have to be found and fixed. DO NOT try to install a higher amp fuse or bypass the fuse for the power window circuit, as this is your only protection against a dangerous overload that could start an electrical fire!If the windows work, it may have been a temporarily overload that caused the fuse to blow. Trying to lower a window that is frozen shut in the wintertime can do this and/or break the window mechanism inside the door.If the fuse is okay, there may be a break in the wiring that routes power to the power window motors and switches. You’ll probably need to look up a wiring harness diagram for your vehicle to identify and trace the wires in the circuit.For more information on diagnosing Power window problems, please go here for step by step instructions on finding out why your power windows will not go up or down.

on Sep 13, 2010 | Acura Integra Cars & Trucks

1 Answer

Multiple electrical problems


yes take each problem one at a time, the passenger window is probably the switch on the passenger door, drivers side rear window sounds like motor or connection problem, your headlight is probably a bad ground for that light power locks a fuse or relay, radio, ck antenna leads

Apr 13, 2014 | 2002 Dodge Durango

1 Answer

Follow me here: The driver side passenger window will go up and down while operated independently with the switch on its door. However, the driver seat master switch will not control window to go down


Not following you completely.
When you say driver side passenger window, you mean the driver side rear window ?
The window motors get power thru a power window control unit and thru the driver master switch.
You'll need a shop manual with the wiring diagrams to track down the problem.

Feb 27, 2013 | 2005 Honda Pilot

1 Answer

Power window wont roll up on driver's side


If, when you hit the button, you do not hear anything at all, it is most likely the power window motor is burned out. If you hit the button, and can hear the motor running in the door, your window is either off it's track, or the motor is worn out where it connects to the cracking mechanism and is not catching it. Popping off the door panel will give you access and you'll be able to see first hand what it is doing once you hit the button. Less likely reasons are a disconnected switch, wire short at the switch, or condensation on the switch.

Oct 01, 2012 | 2003 Suzuki XL-7

1 Answer

My 1999 plymouth voyager mini van has power windows. Initially the drivers side started have intermitant problems with raising or lowering. Shortly after that time the window failed to move either up or...


Hi, I have a 2002 Chrysler voyager (UK) which had the same problem with the drivers window. This issue went on for over 2 years, and I even bought new window runners from the US but still had issues! I have now fixed the problem. The bushes in the window motor had worn to a degree that contact got weaker until no contact was being made at all. I stripped the moter down (easier than I thought) and replaced the brushes at a cost of aroung £5 ($8), now the window is functioning better than it did when I bought at 2 years old, plus I did the same to the passanger window and that improved too. I hope this helps, if you require further info on stripping the motor and removing/replacing it please let me know. (andrew2772@msn.com)

Aug 17, 2010 | 1999 Plymouth Voyager

1 Answer

2000 rodeo drivers side electric window goes up but not down?


pull the control switch out n clean contacts or try and spay contact cleaner on them

Jun 13, 2009 | 2001 Isuzu Rodeo

2 Answers

Driver power window wont work???


sounds like your window lift motor may be bad but you can test it by
The window switch and master switch are actually wired in series. A problem with either switch affects motor operation.
A dead motor can be diagnosed with a 12-volt light or voltmeter by first ensuring that B+ is available to both switches. Moving the switches should switch the B+ from one side to the other. By connecting a testlight across the switch, the presence of voltage and the switch itself can be checked.
The motor is checked easily by jumping the terminals to B+ and ground. Reversing the connections should reverse the direction of the motor, raising and lowering the window.
Corroded switch contacts are a source of excessive resistance.

Nov 09, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...