Question about 2002 Chevrolet TrailBlazer

2 Answers

2005 trailblazer The key is stuck in the ignition and there is no power to the car what so ever. what could be the problem?

Posted by on

  • Anonymous Jul 18, 2008

    Your battery is dead. Jump the battery and the truck should start. Replace the battery.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Them two are right i have a 03 trailblazer and when the batery dies the key gets stuck.

Posted on Jul 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The guest is right. The same thing happened to me. I replaced the battery and the key came right out.

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Trailblazer that dies out when you come to a stop. It starts back up with no problem


The alternator wouldn't have anything to do with either of the problems your having ! The key getting stuck in the ignition could be a problem developing with the lock cylinder . Can you turn the key to the off position an then it won't come out ? Or it won't turn to the off position an then not come out ? There are safety devices in place that won't let the key come out if not in gear an foot on the brake pedal etc... electronic an they do fail . Electronic Park Lock (EPL)/Ignition Lock Cylinder Control Actuator:Linear Shift Assembly: If the vehicle is equipped with a column mounted gear shift, it has a linear shift assembly on the steering column. The linear shift assembly has a cable that runs from the linear shift assembly to the ignition lock cylinder case. The purpose of this cable is to prevent the ignition key from being turned to the OFF position when the transmission is in gear and the vehicle may still be moving. The linear shift assembly cable contains a pin that is spring loaded to mechanically prevent the ignition key cylinder from being turned to the lock position when the vehicle transmission is not in the PARK position. If vehicle power is lost, and/or the transmission is not in the PARK position the operator will not be able to turn the ignition key to the lock position and will not be able to remove the ignition key from the column.

Now for the stall at stops , Your vehicle has Throttle Actuator Control (TAC) System ,electronic throttle control or drive by wire ! It is electronical controlled .
There are sensors in the gas pedal an on the throttle body ,they are connected to the PCM/ECM - engine computer with wiring ! There is a DC electric motor on the throttle body , this is what opens the throttle plate . Throttle plates do become dirty with varnish an stuff that can cause idle problems ! There are videos on youtube showing how to clean a throttle plate . How to Clean Throttle Body 2007 Chevy Trailblazer

Aug 13, 2016 | 2005 Chevrolet Chevrolet TrailBlazer EXT...

1 Answer

Jump start trailblazer will run that day but next day it is dead there is a short some where


2006 Trailblazer won't start - Discussion on Topix

www.topix.com > Chevrolet TrailBlazer
Sep 6, 2012 - My 2006 Trailblazer will not start, bought a new battery, still will notstart, not even with a jump. ... i get a jump i drive it and charged the battery it seemed fine but then i went ... Then, next morning, when I turn key, all lights come on and radio... back a day and 360$ well that pos still will crank but will not start. 02 trailblazer a/c problem
Jul 21, 2011
2003 trailblazer key is stuck in ignition
Dec 21, 2009
2003 Chevy Trailblazer will not start
Jul 21, 2009
2002 trailblazers won't start
Aug 24, 2007
More results from www.topix.com

Oct 29, 2015 | 2005 Chevrolet TrailBlazer

2 Answers

It's a 2005 Chevy trailblazer Ls i'm retired on a


You can bypass the passlock system but its not easy and not for someone that is not good with their hands. Look up bypass GM passlock to see if you think you can handle that.

Oct 19, 2014 | 2005 Chevrolet TrailBlazer

1 Answer

2004 chevrolet trailblazer-key won't turn back to off position for removal


probable cause is that the ignition switch is stuck.ignition cylinder and ignition switch on trailblazer is separate.

Jan 12, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

2004 4WD Trailblazer didn't start this morning. No crank, no ticking but some power to accessories. My son tried to put window down and the radio came on. Later in the day, the radio came on...


I had the key stuck once. Make sure the key is in the off position. Make sure the steering wheel is not locked against a stop. The vehicle must be in park and try stepping on the brake. Try jumping the car with another car or battery pack.

Nov 30, 2010 | 2004 Chevrolet TrailBlazer

2 Answers

Key stuck in ignition of Trailblazer.


There is a small 1/4'' oblong cover plate on the underside of the stearing column. Pop this out and there is a button you push in ( like the Crysler key relase) and this will allow you to remove the key.

Dec 22, 2008 | 2002 Chevrolet TrailBlazer

2 Answers

Key stuck in ignition of 2002 chev. trailblazer


Remove the cover of the switch, there is a silver button below the place where you put the key. Press it and the key will be released!

Dec 21, 2008 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...